To Next PageTo Next PageWhy won't my Scotts 61940S start?
Your Scotts Lawn Mower might not start for several reasons. Ensure the safety key is inserted, the battery pack is charged and attached correctly, and the handle is in an operating position. Also, the mower deck should be free of grass and debris, and the battery pack and mower circuitry should not be too hot.
How to fix Scotts 61940S handle not in position?
If the handle of your Scotts Lawn Mower is not in position, it may be because the carriage bolts are not seated properly, so adjust the height of the handle and make sure the carriage bolts are seated properly. Another reason may be that handle knobs are not tightened, so tighten handle knobs.
What to do if my Scotts Lawn Mower stops while mowing?
If your Scotts Lawn Mower stops while mowing, the battery pack may be depleted, so charge it. The mower could be in an overload condition, so raise the cutting height or slow down your mowing speed. The mower deck might be clogged, so unclog it. Also, the battery or mower circuitry could be too hot, so allow the battery pack or mower to cool down.
Why does my Scotts Lawn Mower vibrate excessively?
Excessive vibration in your Scotts Lawn Mower can be caused by several factors. The cutting blade might be loose, so tighten the blade bolt. The cutting blade could also be unbalanced, so balance the blade. Alternatively, the cutting blade might be bent, so replace the blade.
Why does my Scotts 61940S cut unevenly?
Uneven cutting with your Scotts Lawn Mower can occur if the blade is dull, so sharpen or replace it. It could also be that the cutting height is not set properly, so raise the blade to a higher setting. The blade might also be assembled incorrectly, so reassemble the blade, following the instructions.
General| Brand | Scotts |
|---|---|
| Model | 61940S |
| Category | Lawn Mower |
| Language | English |
Details safe operating practices, child safety, and precautions for slopes.
Advisories regarding chemicals known to cause cancer or reproductive harm.
Guides on unfolding the handle and attaching the grass catcher bag.
Instructions for attaching the side discharge chute and installing the battery pack.
Step-by-step guide for starting, stopping, and adjusting the cutting height.
