Need help?Do you have a question about the Scotts Gro 7 Zone Controller and is the answer not in the manual?
General| Number of Zones | 7 |
|---|---|
| Rain Delay | Yes |
| Watering Programs | Multiple |
| Manual Watering | Yes |
| Backlit Display | Yes |
| Battery Backup | Yes |
| Power Source | Electric |
| Watering Schedule | Customizable |
Lists all items included in the Gro™ 7 Zone Controller package.
Lists necessary tools and requirements for installation.
Label current zones and wires before disconnecting using provided orange, black, and gray labels.
Dismount your old sprinkler controller from the wall.
Pull cover apart from base using the bottom opening to expose ports.
Mount the Gro™ Controller using the four provided screws, utilizing wall anchors if necessary.
Connect labeled wires to corresponding ports (orange for zones, black for common, gray for pump start).
Connect the power supply to the controller and plug into an electrical outlet.
Attach the controller cover; indicator light turns green, awaiting internet connection.
Download the app to connect the controller to Wi-Fi, assign zones, and set schedules.
Equipment tested for Class B digital device limits per FCC Rules to provide reasonable protection against interference.
Modifications not expressly approved may void user's authority to operate the equipment.
Antenna must provide 20cm separation from all persons and not co-locate with other antennas.
Malfunctioning systems can cause water damage; ensure system is in good repair before installation.
To Next Page