EasyManuals Logo

Scotts S12020 Series User Manual

Scotts S12020 Series
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
10 — English
TROUBLESHOOTING
1-877-243-2774
www.scotts.com
CALL US FIRST
For any questions about operating or maintaining your product,
call the help line — 1-877-243-2774!
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.
PROBLEM POSSIBLE CAUSE SOLUTION
Line will not advance when
using the auto-feed head
Line is welded to itself.
Not enough line on spool.
Line is worn too short.
Line is tangled on spool.
Lubricate with silicone spray.
Install more line. Refer to Line Replacement earlier
in this manual.
Pull line while pressing button.
Remove line from spool and rewind. Refer to Line
Replacement earlier in this manual.
Grass wraps around shaft
housing and string head
Cutting tall grass at ground
level.
Cut tall grass from the top down to prevent wrapping.
Motor fails to start when switch
trigger is depressed
Battery is not secure.
Battery is not charged.
To secure the battery pack, make sure the latches
on each side of the battery pack snap into place.
Charge the battery pack according to the instructions
included with your model.
MAINTENANCE
STORING THE TRIMMER
Remove the battery pack from the string trimmer.
Clean all foreign material from the trimmer.
Store in a place that is inaccessible to children.
Keep away from corrosive agents such as garden chemi-
cals and de-icing salts.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Scotts S12020 Series and is the answer not in the manual?

Scotts S12020 Series Specifications

General IconGeneral
BrandScotts
ModelS12020 Series
CategoryTrimmer
LanguageEnglish

Related product manuals