EasyManuals Logo

Scotts S2048, S2554 User Manual

Scotts S2048, S2554
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Introduction
INTRODUCTION
THANK YOU for purchasing a Scotts
product.
Read this manual and your attachment manual
thoroughly. Failure to do so could result in personal
injury or equipment damage.
This manual should be considered a permanent part of
your machine and should remain with the machine when
you sell it.
Measurements in this manual are metric units and their
U.S. customary equivalents. RIGHT-HAND and LEFT-
HAND sides are determined by facing in the direction
the machine will travel when going forward. When you
see a broken line arrow (------>), it indicates the part it is
pointing to is hidden.
Record identification numbers below. Be sure to record
all the numbers to help in tracing the machine if it is
stolen. You also need to give these numbers to your
dealer when you order parts.
DATE OF PURCHASE: _______________________________
DEALER NAME: ____________________________________
DEALER PHONE: ___________________________________
TRACTOR SERIAL NUMBER (A), (Located on rear
of tractor):
__ __ __ __ __ __ __ __ __ __ __ __ __
ENGINE SERIAL NUMBER (B), (Located on engine):
__ __ __ __ __ __ __ __ __ __ __ __ __
c
WARNING:
The Engine Exhaust from this
product contains chemicals known to the
State of California to cause cancer, birth
defects or other reproductive harm.
CALIFORNIA Proposition 65 Warning
A
B

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Scotts S2048, S2554 and is the answer not in the manual?

Scotts S2048, S2554 Specifications

General IconGeneral
EngineBriggs & Stratton
Cutting Width (S2048)48 inches
Cutting Width (S2554)54 inches
Deck MaterialSteel
Speed5.5 mph

Related product manuals