EasyManua.ls Logo

Scotty Depthpower 30" - Features; Speed & Efficiency; Clutch Brake; Auto-Stop

Scotty Depthpower 30"
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Electric Downrigger Manual
Thank you for choosing a Scotty Downrigger. In 1973 Scotty produced its
rst downrigger. Our goal was to manufacture a superior downrigger, built to
withstand the demanding marine environment, and we now produce many
manual and electric models. This instruction book will give you basic
instruction on mounting and using your downrigger. Please read carefully.
It
will improve your results and also give you important tips on downrigger
safety and care. Good Fishing!
Features
Speed & Efciency
The Scotty Depthpower Downrigger’s drive mechanism incorporates a
positive drive gear belt to turn the downrigger spool. This highly efcient
belt system is used by many auto makers for valve timing, and the benet
to the sherman is that power is transferred from the motor at a greater
efciency than worm gear drives used in most electric downriggers. The
result is a faster retrieval speed with less electric power used. The Scotty
Depthpower Downrigger will retrieve at speeds two to three times faster
than most electrics.
Clutch Brake
The Scotty clutch brake allows descent of the downrigger weight at any
speed you choose. Most of the time you will want a slow, even
descent speed to avoid tangles. However, in instances where you
want a lure deep very quickly, the Scotty will respond, giving you
complete control. In addition, the brake is factory set to allow the line to
pay out if you hang up on the bottom. If you do happen to hang up on the
bottom, the clutch brake may allow you time to turn the boat around
and lift free the weight. It is advisable to always carry a good set of wire
cutters in case the downrigger weight cannot be set free.
Auto-Stop
Auto-Stop control permits hands free line retrieval and automatically
stops at any pre-set point.

Related product manuals