Need help?Do you have a question about the Scout Boats 222 Sport Fish and is the answer not in the manual?
General| Draft | 15 in (0.38 m) |
|---|---|
| Fuel Capacity | 70 gal (265 L) |
| Dry Weight | 3, 150 lb (1, 429 kg) |
| Length Overall | 22 ft 2 in (6.76 m) |
| Beam | 8 ft 6 in (2.59 m) |
| Seating Capacity | 8 persons |
| Length Overall (LOA) | 22 ft 2 in (6.76 m) |
| Deadrise | 20 degrees |
| Length | 22 ft 2 in (6.76 m) |
| Passenger Capacity | 8 persons |
Explains warranty registration, service procedures, and transferring the warranty.
Informs about Scout's commitment to product improvement and potential changes.
Covers boat registration, insurance requirements, and accident reporting procedures.
Details recommended safety courses and essential safety equipment for boats.
Introduces the propulsion system and engine care.
Explains drive system corrosion prevention and maintenance.
Details engine lubrication requirements and cooling system operation.
Covers propeller types, selection, and performance factors.
Describes the various engine instruments and their functions.
Introduces helm controls, including throttle, steering, and trim tabs.
Explains engine throttle/shift control and neutral safety switch operation.
Details engine power tilt/trim operation and the engine stop switch.
Describes the hydraulic steering system and its maintenance.
Explains trim tab operation, adjustment, and maintenance.
Covers general maintenance for control systems, steering, and trim tabs.
Covers the design and safety of the fuel system.
Details fuel tank, vent, fuel filter, and anti-siphon valve.
Provides instructions and safety precautions for fueling the boat.
Covers periodic inspection and maintenance of the fuel system.
Introduces the 12-volt DC and optional AC systems.
Details batteries, battery selector switch, and accessory panels.
Explains the AC system, shore power connection, and battery charger.
Covers maintenance for 12-volt DC and AC electrical systems.
Describes the fresh water tank, pump, and lines.
Explains how to operate the fresh water system.
Covers routine maintenance for the fresh water system.
Provides steps for sanitizing the fresh water tank.
Introduces raw water systems and priming procedures.
Explains the operation of the raw water system and washdown.
Details the operation of the livewell system.
Covers routine maintenance for raw water systems and components.
Explains the gravity drainage system and thru-hull fittings.
Covers cockpit drains, bilge drainage, and hull plugs.
Details drains for T-tops, fishboxes, coolers, and storage compartments.
Outlines essential maintenance for proper drainage.
Describes cabin ventilation via deck hatches and port windows.
Discusses carbon monoxide hazards and proper boat ventilation.
Covers maintenance for ventilation components like hatches and windows.
Details deck fittings, cleats, and the anchor locker system.
Covers hull construction, engine mounting, and swim platform.
Describes general cockpit features and model-specific elements.
Describes head compartment features and storage.
Explains portable and porcelain head systems, including maintenance.
Details the interior layout and features of the Abaco cuddy cabin.
Covers the installation and function of the CO detector.
Covers general safety equipment and engine alarm functions.
Explains the function of neutral safety and engine stop switches.
Lists required safety equipment like PFDs, distress signals, and fire extinguishers.
Details the carbon monoxide detector and its importance.
Covers first aid preparedness and optional safety equipment.
Explains capacity labels and location of warning labels.
Covers safe operation practices and basic navigation rules.
Details pre-cruise checks and general boat operation procedures.
Explains techniques for docking, anchoring, and mooring the boat safely.
Covers collision, grounding, flooding, capsizing, and man overboard situations.
Discusses operation during fishing, water skiing, and trash disposal.
Provides guidelines for safely trailering the boat.
Covers hull cleaning, bottom painting, and anode maintenance.
Details cleaning and care for interior and exterior fabrics.
Covers cleaning of interior surfaces like woodwork and Corian.
Explains maintenance for bilge pumps and drainage systems.
Covers procedures for preparing the boat for storage.
Details winterizing steps for water systems and engines.
Outlines procedures for recommissioning the boat after storage.
Addresses issues with steering response and boat handling.
Covers sluggishness, loss of speed, and boat vibration.
Diagnoses common engine issues like overheating and RPM limits.
Solves issues with pumps and other boat accessories.
To Next Page
