Need help?Do you have a question about the ScoutGuard SG560-8M and is the answer not in the manual?
General| Image Sensor | 8MP Color CMOS |
|---|---|
| Flash Type | IR Flash |
| IR Flash | Yes |
| Battery Life | Up to 6 months |
| Operating Temperature | -20°C to 60°C |
| Waterproof Rating | IP54 |
| Storage | Up to 32GB SD card |
| PIR Sensitivity | Adjustable (Low/Normal/High) |
| Power Supply | Battery |
Describes the camera as a surveillance camera triggered by movement, capturing pictures or videos.
Lists the camera's I/O interfaces like USB, SD-card slot, TV output, and DC power connector.
Explains the information displayed on the monitor when the camera is turned on.
Lists the supported file formats for images (JPG) and videos (AVI), and file system (FAT32).
Details how to supply power to the camera using four AA batteries and their types.
Explains the correct procedure for inserting the SD-card into the camera.
Describes how to power on the camera and enter the ON mode, including buffering time.
Explains how to enter TEST mode for customer settings, manual capture, and preview.
How to access menu settings in TEST mode for manual customization.
Instructions for manually capturing photos or videos using the SHOT button.
Methods for viewing captured images or videos on the control or TV monitor.
How to power off the camera and notes on standby power consumption.
How to access the camera settings menu via the MENU button in TEST mode.
Provides steps to format the SD-card, warning about data deletion.
How to adjust the motion sensor's sensitivity (High, Normal, Low).
Lists the default settings for various camera parameters like mode, size, and time.
Explains how to set the camera mode to Video or Image via shortcut or setting menu.
Details how to set the image resolution to 5MP or 8MP.
Details how to set the video resolution to 640x480 or 320x240.
Instructions for setting the camera's date and time.
How to set the number of photos taken per trigger (1, 2, or 3).
How to set the duration of video recordings from 1 to 60 seconds.
How to set the delay between motion triggers to prevent false captures.
How to adjust the motion sensor's sensitivity (High, Normal, Low).
How to enable or disable the date and time stamp on images/videos.
How to set a specific time window for the camera to be active.
Steps to restore all camera settings to their original default values.
Step-by-step guide to delete single or all captured images/videos.
Explains the naming convention for image and video files.
Information about firmware upgrades and associated risks.
To Next Page
