5.4 Wheels
Check the tyre inflation pressure, referring to the values on the tyre shoulder. Check the state
of wear of the rubber: there must be no cuts, cracks, foreign bodies, abnormal swellings,
exposed canvas and other damages.
5.5 Brake system
Check the operation of the brakes with a low-speed braking test (max. 6 km/h) in an obsta-
cle-free zone, first with the rear brake and then with the front brake.
Check with negative results
In the event that defects of any kind are found during the preliminary checks and even a single
check has negative results, do not ride the pedal-assist bicycle.
Activate all measures immediately to make a proper adjustment, and if necessary, contact the
Support Service.
ATTENTION
11
To Next Page
Loading...
