For proper use of the battery in your EPAC vehicle, we recommend that you always
charge the battery after each use of the bicycle.
Using the inflation valve on the rims, check the inflation pressure of the tyres using a compres-
sor and a pressure gauge gun or a workshop pump.
Check the condition of the tread, the rim and the attachment of the rims to the hubs. If you need
to replace the tyres, contact the Support Service or a qualified tyre dealer.
Do not modify the tensioning of the spokes: the adjustment must be carried out by specialised
personnel and with suitable equipment.
The brakes must be adjusted in such a way as to ensure effective braking, and at the same time
the control levers must have a range sufficient for modulating braking: in other words, the
brakes must be neither too loose nor too tight.
15
To Next Page
Loading...
