15
12
13
Next, as in the Left Box, you will use shelves as spacers to properly
align and install the Right Box Divider.
Take a moment to locate these shelves:
Right Box
Side 1
3 x 13”
Notions
Shelf
x6
13 x 13”
shelves
x2
Slide divider in and align with
pilot holes on lid and base.
Add shelves as shown
Once divider and shelves are in place
make sure they fit tightly.
Use a Phillips screw driver to
MANUALLY insert (4) 1 1/2” screws
into pilot holes to secure divider.
Right Box
Side 1
**Divider MUST be screwed in MANUALLY in order to avoid damaging your WorkBox.**
1 1/2”
Screws
x4
To Next Page
Loading...
