ScrapBox WorkBox 3.0 - Page 21

21
CENTER BOX
Carefully fit divider 2 Right Side
onto corresponding posts on Shelf 3.
Tap with Mallet until secure.
Repeat for Divider 2 Left Side.
Once dividers are in place,
insert (2) Cams on each divider.
Use Allen Wrench to turn Cams
until secure.
Locking
Cams
x4
11
12
Center Box
Shelf 3
Bottom Side
Center Box
Divider 3
Left Side
Center Box
Divider 3
Right Side
Finished Edge