22
Fit Shelf 2 onto the green dowels
on the bottom edge of Dividers 2.
Tap CAREFULLY with Rubber Mallet to
ensure a tight fit.
Use Phillips Screw Driver to MANUALLY
insert (4) 1 1/2” screws into pre-drilled
screw holes on bottom side of Shelf 2
to secure Dividers 2.
Center Box
Shelf 2
Bottom Side
Center Box
Shelf 2
Bottom Side
**Shelf must be screwed into dividers MANUALLY to avoid damaging your WorkBox.
14
13
To Next Page
Loading...
