To Next PageTo Next Page
Need help?Do you have a question about the SCS Sentinel MBA0051 and is the answer not in the manual?
Lists all components included in the kit.
Provides physical dimensions of the main motor unit.
Illustrates the basic wiring and connection points for the gate automation system.
Details required measurements for proper gate automation installation.
Step-by-step guide on how to physically mount the motor unit.
Explains how to manually release the gate motor in case of power failure.
Provides a detailed schematic of electrical connections for the control board.
Details power supply connections for the gearmotors and wiring.
Configures the system for single or double leaf gate operation.
Adjusts the automatic closing time for the gate.
Configures photocell functionality for safety during gate operation.
Details the procedure for programming remote controls to the system.
Guides through the system learning process for dual-leaf gate operation.
Guides through the system learning process for single-leaf gate operation.
Lists specifications for the main motor unit.
Lists specifications for the blinker light accessory.
Details technical specifications for the photocell safety sensors.
Provides technical specifications for the remote controls.
Lists common problems and their corresponding solutions.
General| Type | Garage Door Opener |
|---|---|
| Maximum thrust | 500 N |
| Radio frequency | 433.92 MHz |
| Drive Type | Chain Drive |
| Safety Sensors | Yes |
| Warranty | 2 years |
| Power supply | 230V AC |
| Remote control range | 30 meters |
| Speed | 12 m/min |
| Remote Controls | 2 |
