07
3.2 Operating Scenario 2: Two person intercom, and
pairing to cellphone + Bluetooth
GPS + speed detector or radio
Pairing Procedure:
Step 1:
Switch A to search mode (details to 2.1.2), B to pairing mode (details to 2.1.1) .
when both headset stop blue and red light flashes, they are paired.
Step 2: Switch A to pairing mode (details to 2.1.1), cellphone search this A and pair it up.
Step 3: Keep A in pairing mode (details to 2.1.1), use Bluetooth GPS to search A and pair it up.
Step 4:Use 2.5mm to 3.5mm AUX in cable to connect speed detector or radio to S-1 ,
and switch S-1 to wire connecting (details to 2.3 ) , all audio inter-grade are completed .
*Switch on intercom, both rider and passenger can hear audio from GPS, speed detector or radio.
if rider gets an incoming call , device will cut off the intercom .when rider’s call is finished ,
device will reconnect automatically .
To Next Page
Loading...
