08
3.3 Operating Scenario 3: Two person intercom, rider
using cellphone + Bluetooth GPS, passenger
use Bluetooth speed detector.
Pairing Procedure:
Step 1:
Switch A to search mode (details to 2.1.2), B to pairing mode (details to 2.1.1)
.when both headset stop blue and red light flashes, they are paired .at same time
instantly switch intercom.
Step 2: Switch A to pairing mode (details to 2.1.1), cellphone search this S-1 and pair it up.
Step 3: Keep A in pairing mode (details to 2.1.1), use Bluetooth GPS to search A and pair it up.
Step 4: Set B to pairing mode (details to 2.1.1), use Bluetooth speed detector to search B and
pair up.
*When both headsets are switched off, and rider or passenger wants to reconnect, please press
rider’s intercom button to reconnect and will be able to share all audio source again.
Rider Headset A Passenger Headset B
To Next Page
Loading...
