Care and Maintenance
• It is necessary to rinse the buoyancy compensator with clean, fresh water after
diving in accordance with the procedure described above,
• the buoyancy compensator should be given an annual technical inspection
carried out by authorized service,
• during repair and overhaul, only original spare parts should be used,
• after a long period of intensive use (the buoyancy compensator may need
more frequent services depending on how often and in what environment it
works), inspection and maintenance of the buoyancy compensator is
recommended,
• It is necessary to carry out cleaning periodically, and in the case of
contamination, buoyancy compensator cleaning should be carried out using
specialty chemicals. This is done with a cleaning agent called BCD available
from authorized Scubatech representatives.
IMPORTANT
It is essential to commission periodic inspections, repairs and any work
affecting the operation of the buoyancy compensator to the manufacturer or
service authorized by the manufacturer. It is prohibited to disassemble and
assemble components of the buoyancy compensator and for such activities
to be carried out by unauthorized persons.
8. Warranty
During warranty claims it is always necessary to show proof of purchase issued
by an authorized dealer as well as a warranty card containing a record of annual
reviews.
Scubatech guarantees the original purchaser that the product will be free from
defects in materials and workmanship, provided that the recommendations for
use, maintenance and service are complied with, within the following limits.
The guarantee does not apply in the case of misuse, neglect, modification or
unauthorized product service.
The scope of the warranty is limited to repair or replacement of the product,
depending on the decision of Scubatech.
IMPORTANT
Independent repair shall result in loss of warranty and can lead to loss of
life or health.
To Next Page
Loading...
Need help?
General