Need help?Do you have a question about the SD-MDVR SW-0001A and is the answer not in the manual?
Describes the device's key capabilities and specifications.
Details the primary operational functions of the DVR system.
Lists technical parameters and specifications for the device.
Explains the function of each component on the device's front panel.
Identifies and describes the ports and connectors on the 4-channel back panel.
Identifies and describes the ports and connectors on the 8-channel back panel.
Defines the pin assignments for audio and video interfaces.
Details the pin configuration for the power input connector.
Outlines the pin assignments for the Input/Output interface.
Describes the functions and buttons of the remote control unit.
Explains how to connect the power supply to the MDVR unit.
Covers user login procedures and accessing the main system menu.
Provides an overview of the main menu structure and options.
Introduces the search capabilities including record, log, and picture searching.
Details how to search for recorded video files by date and time.
Explains how to query device operation and working logs.
Describes how to search for captured screenshots.
Overview of system configuration options.
Configuration for device identification and network terminals.
Settings for user accounts and password authentication.
Configuration for device date, time, and time synchronization.
Options for managing device power modes and settings.
Importing, exporting, and resetting device configuration parameters.
Procedure for formatting storage disks.
Configuration options for recording setup.
Setting up basic video and audio parameters for recording.
Configuration for the primary video stream quality and format.
Configuration for the secondary video stream for transmission.
Setting up scheduled recording periods.
Managing pre-record time, alarm delay, and alarm file storage.
Configuration for network connectivity.
Setting up the IP and port for the monitoring center.
Configuring LAN settings like IP, Mask, and Gateway.
Configuring mobile network settings for 3G/4G connectivity.
Configuring wireless network settings for Wi-Fi connectivity.
Overview of alarm configuration options.
Setting up input/output alarms and linkage.
Configuring speed-related alarms.
Setting up acceleration and G-sensor based alarms.
Configuring motion detection parameters.
Setting up low/high voltage alarms.
Configuring serial port parameters for external devices.
Configuring PTZ camera protocols and addresses.
Displays detailed system status and hardware information.
Addresses frequently asked questions about device operation issues.
Answers common questions related to GPS functionality and accuracy.
Provides answers to common issues with the 3G wireless module.
Addresses common problems when using the client software.
Covers miscellaneous questions not fitting other categories.
To Next Page
General