sDot XB6-3200B - User Manual

EtherNet/IP
XB6 Series Slice I/O
User Manual
Nanjing Solidot Electronic Technology Co., Ltd.

Summary

Product Parameters

3.4 Digital Parameter

Outlines the input and output parameters for digital I/O modules, including voltage, current, and isolation.

3.5 Analog Parameter

Covers technical parameters for analog input and temperature input modules, including resolution and accuracy.

3.5.1 Technical Parameters

Details technical specifications for analog input and temperature input modules.

3.5.2 Voltage I;O Range Selection and Code Value Table

Provides tables for voltage I/O range selection and corresponding code values for conversion.

3.5.3 Current I;O Range Selection and Code Value Table

Provides tables for current I/O range selection and corresponding code values for conversion.

Panel

4.1.2 Rotary Switch

Explains how to use the rotary switch for IP address setting and reset functions.

4.1.3 ID and Indicators

Details the meaning of IDs and indicators for power and coupler modules, and network port status.

Installation and Disassembly

5.1 Installation Guide

Provides precautions and guidelines for installing the module, including ventilation and clearance.

5.2 Installation And Disassembly Steps

Outlines the step-by-step procedure for installing and removing modules from the rail.

5.3 Installation Diagram

Illustrates the process of installing the power module, coupler module, and I/O modules.

Wiring

6.1 Wiring Terminal

Details the specifications for signal wire terminals, power terminals, and bus interfaces.

6.2 Wiring Instructions and Requirements

Provides precautions, tooling, and stripping requirements for safe and proper wiring.

6.3 XB6-EI0002 Communication Interface Wiring

6.3.1 Scenario 1: There Is Only One Set of XB6-EI0002 Modules in the Network

6.3.2 Scenario 2: There Are Multiple XB6-EI0002 Modules in the Network

6.3.3 Scenario 3: Using Switches In A Network

6.4 I;O Module Wiring Diagram

Provides wiring diagrams for various XB6 series I/O modules.

6.4.1 XB6-3200 A

6.4.2 XB6-3200 B

6.4.3 XB6-1616 A

6.4.4 XB6-1616 B

6.4.5 XB6-1600 A

6.4.6 XB6-1600 B

6.4.7 XB6-0800 A

6.4.8 XB6-0800 B

6.4.9 XB6-0032 A

6.4.10 XB6-0032 B

6.4.11 XB6-0016 A

6.4.12 XB6-0016 B

6.4.13 XB6-0008 A

6.4.14 XB6-0008 B

6.4.15 XB6-0012 J

6.4.16 XB6-A80 V

6.4.17 XB6-A80 I

6.4.18 XB6-A40 V

6.4.19 XB6-A40 I

6.4.20 XB6-A08 V

6.4.21 XB6-A08 I

6.4.22 XB6-A04 V

6.4.23 XB6-A04 I

6.4.24 XB6-A80 TM

6.4.25 XB6-A40 TM

6.4.26 XB6-P04 A

6.4.27 XB6-P20 D

6.4.28 XB6-P20 DS

6.4.29 XB6-C01 SP

Operation

7.2 IP Settings And Modifications

Explains how to set and modify the IP address of the device.

7.2.1 Setting The IP Address With A Rotary Switch

Details how to set the IP address using the rotary switch on the module.

7.2.2 Setting The IP Address Via The Host Computer Software

Guides on setting the IP address using host computer software like KV STUDIO.

7.2.3 Setting An IP Address With The IP Setting Tool

Explains how to set the IP address using the dedicated IP Setting Tool.

7.2.4 Setting the IP Address Via Ethernet Device Configuration

Describes setting the IP address using the Ethernet Device Configuration tool.

7.3 Restore Factory Settings

Provides steps to restore the module to its factory default settings.

7.4 Module Parameter Setting Function

Covers functions for configuring module parameters like output actions and input filters.

7.4.1 Digital Output Clear;Hold Function

7.4.2 Module Output Action Configuration Function in Bus RUN;IDLE State

7.4.3 Digital Input Filter Time

7.4.4 Analog Filter Settings Function

7.4.5 Analog Range Configuration Function

7.6 Bus Module Configuration Description

Describes configuration steps for different software environments like CODESYS, KV STUDIO, CX-One.

7.6.1 Application in CODESYS V3.5 Software Environment

Guide to configuring XB6 modules using CODESYS V3.5, including EDS file installation.

7.6.2 Application In KV STUDIO Ver.10 G Software Environment

Guide to configuring XB6 modules using KV STUDIO Ver.10G, including project creation.

7.6.3 Application In CX-One Software Environment

Guide to configuring XB6 modules using CX-One software, including PLC setup.

sDot XB6-3200B Specifications

General

Brand	sDot
Model	XB6-3200B
Category	I/O Systems
Language	English