To Next PageTo Next Page
Need help?Do you have a question about the SDT International LUBExpert and is the answer not in the manual?
General| Data Logging | Yes |
|---|---|
| Connectivity | USB, Bluetooth |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Battery Life | 10 hours |
| Display | Color Display |
| Sensors | Temperature |
Key operational points and battery recommendations for the LUBExpert device.
Details SDT's recommendations for annual calibration and warranty program adherence.
States compliance with applicable European Directives and the CE logo.
Outlines the conditions required for LUBExpert to be covered by the Limited Lifetime Warranty Program.
Details the terms and conditions for using SDT's intellectual property and content.
Explains LUBExpert as an ultrasound solution dedicated to bearing lubrication tasks.
Details the different versions of LUBExpert: Kit, Dynamic Kit, and Upgrade.
Lists the hardware features and functions of the LUBExpert Ultrasound Data Collector.
Enumerates specific hardware components and capabilities of the LUBExpert Base Kit.
Describes the Ultranalysis Suite UAS3 software for managing LUBExpert data.
Itemizes the components included in the LUBExpert Base Kit and accessory packs.
Information on the upgrade process and criteria for SDT270 devices to gain LUBExpert functionality.
Provides step-by-step instructions on how to charge the LUBExpert device battery.
Explains the procedure for powering the LUBExpert device on and off using the power button.
Guides users on installing the necessary UAS3 software and SDT device driver.
Advises on checking for the latest firmware and software updates for optimal performance.
Explains how to configure and manage grease guns within the UAS3 software settings.
Details how to manage different types of lubricants used for bearing greasing in UAS3.
Guides on selecting specific sensors (LUBEsense1, TEMP2) for LUBExpert mode in UAS3.
Covers creating and managing data folders and tree structures for LUBExpert data in UAS3.
Explains how to add descriptive and measurement tree nodes to the database structure.
Details the process of adding descriptive nodes to categorize physical assets.
Describes adding measurement nodes, specifying sensor types like LUBEsense1.
Guides on linking LUBEsense1 and TEMP2 sensors to measurement nodes in UAS3.
Explains configuration of data collection settings for LUBExpert measurements.
Details the steps to create new lubrication work orders and surveys within UAS3.
Explains the process of uploading work orders from UAS3 to the LUBExpert device.
Provides a checklist report to ensure all necessary tools and lubricants are prepared for field work.
Provides instructions on how to properly connect the LUBEsense1 ultrasound sensor.
Outlines the initial operation steps for using the LUBExpert device in the field.
Explains advanced data collection methods using the LUBExpert app and dynamic features.
Details the procedure for downloading collected lubrication data from the device to a PC.
Describes how to view and analyze lubrication data using UAS3 dashboards and metrics.
Explains how the tree view displays alarm and lube status for assets and points.
Details the specific dashboard view for analyzing LUBEsense1 sensor data.
Describes the detailed views of measurements and events available in the bottom pane.
Introduces reports for tracking and analyzing lubricant consumption.
