Need help?Do you have a question about the SDT International SDT170 and is the answer not in the manual?
General| Brand | SDT International |
|---|---|
| Model | SDT170 |
| Category | Measuring Instruments |
| Language | English |
Connect the charger to the unit and plug into mains power socket.
Remove battery pack, connect charger to pack, plug into mains.
Install software, connect unit, transfer data using MPlus.
Remove sensor cap, press power key; automated self-test starts.
Describes screen for continuous or max value functions.
Choose Continuous for average, Max value for peak measurement.
Use arrow keys to optimize amplification level (A).
Select a user-defined route for data collection.
Point sensor to control point; read signal level.
Push M key to display memory, select point, store data.
Refer to DataManager manual for data transfer.
Summarizes features and differences between SDT 170 models.
Explains common icons and information displayed on the screen.
Use keys to adjust amplification; arrows guide optimal setting.
Press power key after self-test to access the main menu.
Lists available menus: Select Route, View Data, Erase Data, Settings.
Allows selection of a user-defined route for data storage.
Select a preloaded or standard route for data collection.
Return to measuring screen; unit waits for measurements.
View stored data: select memory location, validate.
Press power key, select Settings, press Enter.
Set display for US sensors: Continuous, Max Value, Discov. Fr. Band.
Charge battery pack while unit is in use; longer charging time.
Charge battery pack separately; best solution for fast charging.
Main applications and description of the contact probe.
Main applications and technical data for flexible sensors.
Main applications and description of the parabolic sensor.
Main applications and technical data for magnetic sensors.
Main applications and description of threaded sensors.
Description and technical data for 14mm and 20mm open sensors.
Description and technical data for 13mm and 23mm closed sensors.
Cone form concentrator for leak detection at average distance.
Portable transmitter for tightness control of small volumes.
Fixed power transmitter for large volumes tightness control.
Adjustable power transmitter for tightness control of large volumes.
Measures ambient noise and hearing protection levels (dBA).
Measures linear/rotation speed (rpm/rps) optically or by contact.
Measures temperature using 'J' or 'K' type thermocouples.
Measures temperature without contact using a pyrometer.
Measures flow (sccm/scfm) of compressed air leaks.
See section 5.14 for M+; refer to DataManager for MD.
2-year warranty on unit, 6-month on battery/accessories.
To Next Page
