Need help?Do you have a question about the Sea & Sea YS-01 and is the answer not in the manual?
General| Brand | Sea & Sea |
|---|---|
| Model | YS-01 |
| Category | Underwater lighting |
| Language | English |
Avoid electrical hazards, disassembly, fire, and flammable gas.
Use approved batteries, remove before storage, avoid wet hands, and caution with battery caps.
Avoid pointing strobe at people, avoid hot surfaces, and prevent damage from impacts.
Avoid use while driving, on unstable surfaces, and keep away from children.
Adhere to depth limits, avoid smoke/smell, handle flooding carefully, and protect from moisture/debris.
Keep away from magnetic fields and check regulations for air travel.
Avoid strobe near eyes, handle hot product carefully, and avoid strong impacts.
Rinse with fresh water, use connector caps, avoid chemicals, and proper storage conditions.
Periodic maintenance for storage, company liability for image loss or damage.
Avoid fire, disassembly, short-circuiting, improper charging, and leakage.
Keep batteries dry, avoid case damage, and do not overcharge.
Handle batteries carefully, avoid extreme temperatures, and proper storage.
Identifies and labels all external parts and their functions.
Explains the functions of the OFF, TTL, and pre-flash modes.
Details how the strobe works with camera pre-flashes.
Describes the automatic power-off feature after inactivity.
How to adjust light intensity using the control dial.
Operation of the target light and its indicators.
Notes regarding target light illumination and battery level indication.
Explains the meaning of the red (Ready) and green (TTL) lamps.
How to attach the strobe using the fixing bolt.
Warnings about incorrect fixing bolt installation and storage.
Detailed steps for inserting batteries, including O-ring maintenance.
How to align and lock the battery cap.
Warnings about battery replacement timing, handling, and mixing battery types.
Steps for connecting the strobe to a camera housing via fiber-optic cable.
Instructions for using the strobe mask when the housing lacks a socket.
Setting camera to forced-flash and using fiber-optic cable adapters.
How to connect an additional strobe using a fiber-optic cable socket.
Guide to mode switch settings for different cameras and flash types.
Steps for setting the mode and adjusting light levels for manual control.
How to perform test shots to verify mode switch settings.
Using the strobe in slave TTL mode with a main strobe.
Conditions and limitations for using DS-TTL mode.
Step-by-step guide on how to attach the diffuser to the strobe.
Warning about ensuring proper diffuser attachment to prevent loss or damage.
Instructions on how to safely remove the diffuser.
Warning against forcible removal of the diffuser to prevent breakage.
Guidelines for cleaning with fresh water and drying the product.
Recommendations for storing the product to prevent damage and deterioration.
Importance of O-ring care, inspection, and replacement recommendations.
Steps for maintaining the strobe during extended periods of non-use.
Lists all technical data including controls, indicators, and performance metrics.
To Next Page