Sea & Sea YS-D1 User Manual

Sea & Sea YS-D1

33 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

UNDERWATER STROBE

YS-D1

日本語

English

取扱説明書

Instruction Manual

03114

03115

Questions and Answers:

E
Eric JonesAug 12, 2025
What to do if images are too bright or dark in DS-TTL mode with my Sea & Sea YS-D1 Camera Flash?
- S
  Stephen CarpenterAug 13, 2025
  If the captured images are too bright or too dark when taking photographs in DS-TTL mode, first ensure the fiber-optic cable is properly connected. Also, check if the light level control dial in DS-TTL mode is set at +/- compensation. Understand that compensation with the light level control dial may not have any effect depending on the shooting conditions and camera settings.
L
Lori RodriguezAug 16, 2025
Why doesn't my Sea & Sea YS-D1 strobe fire with a fiber-optic cable?
- E
  Elizabeth DuarteAug 16, 2025
  If the Sea & Sea Camera Flash strobe does not fire when using the fiber-optic cable, ensure the fiber-optic cable is properly connected. Check if the built-in flash/main strobe on the camera fires. Also, make sure to remove the sync cord to enable the fiber-optic connection.
F
Frances ThompsonAug 20, 2025
Why are my images dark when using manual mode on my Sea & Sea YS-D1 Camera Flash?
- S
  Sarah PenaAug 20, 2025
  If the Sea & Sea Camera Flash strobe emits light in manual photography mode, but the images are dark, ensure the firing mode for the built-in flash/main strobe on the camera matches the firing mode on the YS-D1.

Sea & Sea YS-D1 Specifications

General

Brand	Sea & Sea
Model	YS-D1
Category	Camera Flash
Language	English

Summary

Safety Precautions

General Safety Warnings and Classifications

Covers critical safety warnings including DANGER, WARNING, and CAUTION levels for safe operation.

Battery Safety Guidelines

Battery Handling Dangers and Warnings

Details safety guidelines for battery usage, covering dangers, warnings, and cautions to prevent hazards.

O-ring Maintenance and Handling

O-ring Care, Storage, and Lifespan

Identification of Strobe Components

Installing the Batteries

Step-by-Step Battery Insertion Guide

Provides a detailed, step-by-step guide for correctly installing batteries into the YS-D1 strobe for power.

Connecting the Strobe

Fiber-Optic Cable Connection

Advanced Photography Modes

DS-TTL II and Slave-TTL Operation

Maintenance and Storage Procedures

Troubleshooting Strobe Issues

Common Problems and Solutions

Addresses common problems like the strobe not firing, dark images, or incorrect brightness, and provides solutions.