S
Shane WoodAug 18, 2025
What does 'H3' mean on my Sea Breeze Heat Pump?
- CCharles HernandezAug 18, 2025
If your Sea Breeze Heat Pump displays 'H3', it means overload detection protection has been activated. The Dual-8 nixie tube displays “H3”.
To Next PageTo Next PageWhat does 'H3' mean on my Sea Breeze Heat Pump?
If your Sea Breeze Heat Pump displays 'H3', it means overload detection protection has been activated. The Dual-8 nixie tube displays “H3”.
What does 'A2' mean on my Sea Breeze PTAC415HP3ZC display?
If your Sea Breeze Heat Pump displays 'A2', it signifies a malfunction protection for the electric heating. The Dual-8 nixie tube displays “A2”.
What does 'F0' mean on my Sea Breeze Heat Pump?
If your Sea Breeze Heat Pump displays 'F0', it indicates Freon-lacking protection. The Dual-8 nixie tube displays “F0”.
What does it mean when the STATUS indicator of Sea Breeze PTAC415HP3ZC flashes six times?
If the STATUS indicator on your Sea Breeze Heat Pump flashes six times and off 3s circularly, it indicates high temperature prevention protection for the outdoor condenser.
What does it mean when the STATUS indicator of Sea Breeze PTAC415HP3ZC flashes seven times?
If the STATUS indicator on your Sea Breeze Heat Pump flashes seven times and off 3s circularly, it indicates frost prevention.
What does it mean when the STATUS indicator of Sea Breeze PTAC415HP3ZC flashes eight times?
If the STATUS indicator on your Sea Breeze Heat Pump flashes eight times and off 3s circularly, it indicates high temperature prevention protection for the evaporator.
What does it mean when the STATUS indicator of Sea Breeze PTAC415HP3ZC Heat Pump flashes five times?
If the STATUS indicator on your Sea Breeze Heat Pump flashes five times and off 3s circularly, it indicates freeze prevention protection for the evaporator.
What does 'F4' mean on my Sea Breeze PTAC415HP3ZC Heat Pump display?
If your Sea Breeze Heat Pump displays 'F4', it means the outdoor tube temperature sensor is open-circuited or short-circuited. The Dual-8 nixie tube displays ‘F4’, and STATUS indicator will flash four times and off 3s circularly.
What does it mean when the STATUS indicator of Sea Breeze Heat Pump flashes nine times?
If the STATUS indicator on your Sea Breeze Heat Pump flashes nine times and off 3s circularly, it indicates a wrong wire connection for the wired controller.
What does 'F2' mean on my Sea Breeze Heat Pump display?
If your Sea Breeze Heat Pump displays 'F2', it means the indoor tube temperature sensor is open-circuited or short-circuited. The Dual-8 nixie tube displays ‘F2’, and STATUS indicator will flash twice and off 3s circularly.
Details unit's intelligent features like diagnostics, memory, random compressor restart, and protection.
Details settings for temperature display, sensor biasing, energy management, and thermostat control.
Discusses unit installation, sleeve compatibility, and foam seals to prevent air recirculation.
Guidance on preparing sleeves and installing with non-standard grilles.
Details power cord options and connection chart for different unit models.
Details the functions of each dip switch, including default settings.
Explains remote energy management input and the unit's intelligent self-checking control.
Emphasizes filter cleaning importance for efficiency and provides cleaning instructions.
Addresses problems with unit not starting or not cooling/heating.
General| Brand | Sea Breeze |
|---|---|
| Model | PTAC415HP3ZC |
| Category | Heat Pump |
| Language | English |