Sea Breeze SN12I User Manual

950-0252revA March 3, 2016
SN12I HEAT PUMP
NON-PROGRAMMABLE THERMOSTAT
Installation and Operation Manual
Specifications
1
Features
1
Important Safety Information
1
Remove the Old Thermostat
3
Install the New Thermostat
4
Configuration
5
Configuration Menu Chart
6
Parameters
6
System Check
8
Basic Thermostat Operation
9
Troubleshooting
10
Warranty
11
International Refrigeration Products, Inc.
1035 Wheeler Way, Langhorne, PA 19047
Service Hours: M – F, 8:00 AM to 4:30 PM
Tel: 215-750-9876

Sea Breeze SN12I Specifications

General

Brand	Sea Breeze
Model	SN12I
Category	Thermostat
Language	English

Summary

Specifications and Features

Important Safety Information

Removing the Old Thermostat

Thermostat Mounting

Instructions and diagrams for mounting the thermostat base to the wall.

Installing the New Thermostat

Wiring Diagrams

Diagrams illustrating thermostat terminal connections for various system components.

Fan Option Switch

Details on setting the fan option switch for different heating system types.

Configuration Menu

Configuration Menu Chart

Table detailing configuration parameters, options, descriptions, and factory defaults.

Parameters Explained

Detailed explanations for each configurable parameter like cycle rates and delays.

Setting Time and Day

System Check Procedures

Fan Operation Test

Steps to verify the correct operation of the fan switch.

Heating System Test

Procedure to test the thermostat's heating call and auxiliary heat activation.

Emergency Heating System Test

Procedure to test the emergency heat mode and its display indicators.

Cooling System Test

Procedure to test the cooling call, including setpoint and indicator functions.

Basic Thermostat Operation

Filter Review and Reset

Troubleshooting Common Issues

Limited Warranty Policy