Need help?Do you have a question about the Sea Eagle Stealth Stalker 10 and is the answer not in the manual?
Details the 3-year warranty against manufacturing defects and procedures for returns and inspections.
Information on boating registration requirements and recommendations for applying registration numbers.
Provides contact details including phone number, address, and email for customer inquiries.
Discusses motor capacity limits, recommended gas and electric motors, and battery requirements.
Provides tips for rowing, awareness of water conditions, and general safety advice.
Essential safety advice including PFD use, alcohol consumption, and solo boating.
Recommends safety gear like PFDs, drinking water, extra clothing, first-aid kit, and a whistle.
Instructions for installing the floorboards and aluminum struts into the boat.
Guidance on installing Scotty Rod Holders using provided hardware.
Steps for attaching seat mounts to floorboards using bolts and T-nuts.
Instructions for bolting the seat to the pedestal and securing the swivel base.
Details on assembling the Deluxe Fishing Seat, including tethering valves and inserting tubes.
How to use the triple nozzle adapter with the foot pump for inflating the deluxe one-way air valve.
Instructions for attaching the stow bag clips to the boat's mounting pads.
How to open and close recessed air valves for inflation and deflation.
Steps for connecting the foot pump hose and using it to inflate the boat.
Guidance on using the recessed valve adapter with the foot pump hose.
Details on electric pumps, including adapters, power supply, and operation.
Preparing the hull, installing floorboards, and securing them with struts.
Steps for installing the optional motor mount by inserting pegs into mounting pads.
How to close valves and inflate chambers to the correct pressure.
Instructions for inserting and rotating Scotty Rod Holders into their mounts.
How to slide the swivel seat base into the seat mount and secure it.
Information on arranging inflatable seats anywhere within the boat.
Guidance on inserting the male clip of the stow bag into the female part on the boat.
Instructions for assembling oars, securing them to oarlocks, and stowing them.
Steps for laying out and attaching the canopy to the boat, including poles and straps.
Details on the USCG approved Type III PFD, its features, and fit adjustments.
Information on the Torqeedo Travel 1003L electric motor's performance and weight.
Overview of Minn Kota electric trolling motors and their power source requirements.
Details on the portable 10 AMP battery charger, its features, and specifications.
Description of the battery power center, its features, and safety tips.
Lists items included in the repair kit: patches, glue, valve adapter, and wrench.
Recommendation for using PVC-based glue for repairs and suggests Vyna Bond.
Procedure for patching larger leaks, including tracing, applying adhesive, and heat activation.
Method for repairing small punctures with a small drop of glue and allowing ample drying time.
To Next Page
General
