To Next PageTo Next Page
Need help?Do you have a question about the SEA CCT 440 and is the answer not in the manual?
General| Brand | SEA |
|---|---|
| Model | CCT 440 |
| Category | Temperature Controller |
| Language | English |
Covers unit dimensions, power supply requirements, and connection inlets/outlets.
Details key functionalities and operational performance criteria.
Explains indicators for channel, temperature, alarm, release, fault, and ventilation.
Details the functions of mode selection, ENTER/TEST, UP/DOWN, T.MAX and PROGRAM buttons.
Lists requirements for disconnecting power supply and protection fuses.
Details wiring, separation from power cables, and protection against interferences.
Describes the ventilation alarm signal, energizing of the FAN relay, and conditions for activation.
Details anomalies in the temperature detection system, FAULT relay energizing, and LED indications.
Describes how to scroll parameters and interpret anomaly codes like SCF, ICF, dEr.
Details the procedure to reset the power unit to factory values using input keys.
Lists read-only registers for temperature, historical max temp, channel fault, and relays status.
Lists read/write registers for function mode, channel enable, fan status, alarm, and trip settings.
Procedure to enter the relay test menu by pressing ENTER-TEST.
How to select and test individual relays using UP/DOWN and ENTER-TEST keys.
Procedure to exit the relay test menu using the AUTO-MANUAL-SCAN key.
Lists predefined values for Alarm, Release, and Ventilation across different classes (B, F, H).
