Need help?Do you have a question about the Seac APNEA HR and is the answer not in the manual?
Essential safety warnings covering manual reading, training, risks, and physiological considerations.
Instructions on how to turn on the Apnea dive computer.
Details of the dive computer's physical components and operating limits.
Lists key software functions: updates, dive modes, alarms, logbook, stopwatch, countdown, and fitness.
Explains the MSST calculation, its purpose, and display during dives to reduce freediving risks.
Computer reminds user to hydrate every 2 hours during a session.
Configurable alarms for MSST violations, depth, and dive time limits.
Stores dive data, approximately 30 hours with 2-second sampling.
Tracks steps using an accelerometer, requires user height, weight, and age.
Manual, automatic, and computer-commanded methods for rebooting the device.
Details on battery type, capacity, and factors affecting operational run-time.
How the computer handles and displays local and home time zones.
Download, save, view, and process dive data using DiveLogger software.
Identifies the function of each button (HL, HR, LL, LR) on the device.
Methods for entering and navigating through the device's menus and settings.
How user settings, tissue data, and time are saved and restored.
How to start, stop, lap, and reset the stopwatch timer.
Setting and using the countdown timer with alarms.
Setting a single daily alarm synchronized to local time.
Enabling/disabling and setting parameters for MSST, depth, and dive time alarms.
Adjusting backlight brightness, duration, and modes (AUTO, MAN, DIVE).
Selecting from 5 display contrast levels for readability.
Settings for time, date, UTC zones, format, and units of measurement.
Setting the device to PC Link ON for data transfer via USB.
Viewing model name, serial number, and firmware version.
Steps to reset the device, including security code confirmation and warnings.
Special function for reducing energy consumption and extending battery life.
Settings for MSST algorithm, log rate, and water type (salt/fresh).
Main screen displays before a dive, showing time and depth.
Real-time display of dive time, current depth, speed, and temperature.
Alarms for exceeding depth or dive time limits.
Shows surface interval time and MSST countdown after surfacing.
Auditory alarm for diving early before MSST elapses.
Scrollable screens showing max depth, current time, avg depth, dive count.
Recurring warning to hydrate every 2 hours during a session.
How to manually end a dive session or allow automatic termination.
Computer memory capacity for saving FREE dives.
How to view historic summaries and navigate between saved dive sessions.
Connect Apnea to PC/Mac via USB for data download and updates.
Importance of keeping the Apnea Dive Computer updated with the latest software.
Setting user information (height, weight, age) for accurate step counting.
Viewing steps, exercise time, calories burned, and distance traveled.
Step-by-step guide for safely replacing the CR2450 battery and O-ring.
Location of serial number, firmware version, and CE compliance.
Instructions for cleaning, drying, and environmental precautions.
Details the 2-year warranty period and how to claim it with proof of purchase.
Covers factory defects; excludes damage from improper use or unauthorized repairs.
Warning against using solvents; use only running water for cleaning.
General| Display | Yes |
|---|---|
| Display Type | LCD |
| Battery Type | CR2450 |
| Water Resistance | Yes |
| Dive Log | Yes |
| Alarms | Yes |
| Audible Alarms | Yes |
| Vibrating Alarms | Yes |
| Heart Rate Monitor | Yes |
| Maximum Depth | 100 meters |
| Functions | Depth, dive time, surface time, water temperature, heart rate |
| Modes | Apnea |
| Depth Range | 0-100 meters |
To Next Page
