Seac R1 - Page 12

12 English
Theburntimeshownisapproximatebecauseitdependsonthequalityof
thebatteriesused.Werecommendusinghighqualityalkalinebatteries.
1.2Vrechargeablebatteriescommonlyfoundonthemarketcanalso
beused.If rechargeable batteriesareusedwecannot guarantee the
burntimeandlightoutputshownonthetechnicalsheet.
 WARNING
Strictly abide by the polarity shown!
INSERTING BATTERIES
• Twistthetorchlensringnutcounter-clockwise.
• Insertthebatteriesmakingsuretomatchthepolarity(+or-)shownon
thecage.
• GreasethesealingO-ringwithalayerofsiliconegrease.
• Tightenthelensringnutclockwise.
• Checkthatthetorchswitchesonusingtheswitch.
 WARNING
If the batteries are inserted incorrectly (inverted polarity), a
short circuit will be created, causing irreversible damage and a
risk that the torch could explode.
PRE-DIVE INSPECTION
• IfyourR1torchhasnotbeenusedrecently,checktheconditionofthe
batteriesbyensuringthatitswitcheson.
• Checkthatthebody is fully closed.
• Assoonasyouenterthewater,checkthat no bubblesemergefrom
thebodyofthetorch.
8749-manuale Seac torcia R1-TOTALE.indd 12 20/12/2012 11:07:23