Seac R1 - Page 13

13English
FLOODING
Ifwatergetsintothetorch,openthebody,removethebatteries,and
immediatelyrinsetheinternalpartsinfreshwater.Thendryeverything
withaclothandahairdryerusingwarmair,payingcloseattentionto
mechanicalparts.Removeanyrustthatmayhaveformedonthemetal
partsandconductanoperationstest.
Ifasignicantquantityofwaterhasenteredthetorchandhasremained
there for a long period, open the torch body and immediately rinse
the internal parts in fresh water. In this event we suggest that you
immediatelycontactacompetentrepaircenterorcontacttheclosest
SEACshop.
USAGE RESTRICTIONS
• Themaximumoperatingdepthis100m.
• Because of the high temperatures reached by the bulb, the torch
shouldonlyandexclusivelybeusedunderwater.
MAINTENANCE AND TRANSPORT
Itisimportanttoabidebythefollowinginstructions:
• Alwaystransportthetorchinabagthatwillprotectitfromanyblows.
• Avoidprolongedexposuretothesun.
• Afteradive(sea,lake,orpool),alwaysrinsewithfreshwateranddry.
• Checktheconditionofthegaskets(O-rings)everytimeyouopenthe
bodyofthetorch.
• Cleanandgreasethepartsinvolvedinopeningthetorchwithsilicone
grease.
• Itisadvisabletohaveyourproductinspectedannuallybyanauthorised
SEACcenter.
8749-manuale Seac torcia R1-TOTALE.indd 13 20/12/2012 11:07:23