To Next PageTo Next PageWhat to do if my SeaDoo Seascooter RS3 unit does not function?
If your SeaDoo Diving Instrument isn't working, ensure that the Master Switch is turned ON, the Battery Pod is fully charged, and the battery compartment is dry.
How to fix a blocked propeller on a SeaDoo Seascooter RS3?
To fix a blocked propeller on your SeaDoo Diving Instrument, open the Protective Grilles to remove any obstacles. Prior to opening the grille for maintenance, ensure the master switch is in the off position and the battery is disconnected.
General| Brand | SeaDoo |
|---|---|
| Model | Seascooter RS3 |
| Category | Diving Instrument |
| Language | English |
Self-filling ballast hull for neutral buoyancy in seawater. Drain holes allow water to enter/exit. May sink in fresh water.
Front foil and pectoral fins prevent upward skidding for straight-line navigation. Allows resting arms.
Main navigation tool made of impact-resistant material. Ergonomic triggers, D-ring points, and LED status indicator.
Checks if the propeller does not start: Master Switch ON, Battery charged, compartment dry.
Procedure for removing obstruction. Warnings about opening grilles and turning propeller when blocked.
Ensuring O-ring seals are clean and lubricated to prevent water ingress. Cleaning procedure.
How to handle accidental flooding. Water leakage sensor and buzzer alerts. Procedure for drying.
