52 SAFETY INFORMATION
4. Release the iBR lever, there
should not be any reverse thrust.
WWAARRNNIINNGG
AAllwwaayyss eennssuurree pprrooppeerr iiBBRR ssyysstteemm
ooppeerraattiioonn bbeeffoorree ttaakkiinngg tthhee wwaatteerr--
ccrraafftt oouutt ffoorr aa rriiddee..
VVaarriiaabbllee TTrriimm SSyysstteemm ((VVTTSS)) ((iiff
eeqquuiippppeedd))
With the engine running in forward
thrust, use the VTSTM system to
move the jet pump nozzle up, and
then down alternately to check VTS
operation. Confirm the VTS position
indicator movement in the information
center.
Also test the VTS preset trim positions
by double clicking the VTS UP/DOWN
button (as applicable to model).
Refer to
Operating Instructions
for de-
tailed instructions.
PRE-RIDE INSPECTION
To Next Page
Loading...
