2
page
FEATURES
1
page
SFMTE1-05
Model
Color
Features
Max Draw
Rinse Water Variant
Diameter
Type
Material
Box Dimension
SFMTE2-05
White
Built In Macerator
Inlet ³⁄" Hose Barb Outlet 1¹⁄" Hose Barb
Electric Impeller
Ceramic bowl, soft close seat
(LWH)
* *
10A at 24V20A at 12V
SFMTE1-06SFMTE2-06
10A at 24V20A at 12V
570X450X515mm
FreshRaw
RINSE OPTIONS
It is supplied with a combined solenoid valve and siphon breaker assembly for connection to any existing
pressurized water system capable of delivering 2.9 US gpm (11 lpm) or more. The siphon breaker ensures
there is no backflow from the toilet into the water system.more. The siphon breaker ensures there is no
backflow from the toilet into the water system.
Space saving stylish design
Regular household size seat
Fresh or raw water rinse models
Ignition Protection
Virtually silent operation for undisturbed sleep
User selectable choice of "one touch" flush cycles for minimal
water usage - a "Quick Flush" uses less than 1 quart (1 litre)
All plumbing and wiring easily concealed
Uses less than 1.0 amp/hour per day
Non-clogging large bore flush pump macerates waste
FRESH WATER
It is supplied with a remote mounted self-priming pump to bring in sea, river or lake rinse water. Complete
with strainer.
RAW WATER
APPLICATIONS
You may install SEAFLO Deluxe Flush Toilet electrically operated marine toilets in both power and sailing
craft, either above or below the waterline, for use on sea, river, lake or canal.
Your installation may discharge the waste either overboard (provided that your national and local
regulations allow this), or into a treatment system or into an on-board holding tank (U.S.C.G. Marine
Sanitation Devices Type I, II and III)
!
Hygienic white glazed vitreous china bowl for ease of cleaning.
Luxury plastic seat.
PARTS
DESCRIBE
Flush pump
Internally mounted, high speed, non-clogging, centrifugal,
waste macerating pump driven by powerful 240 watt, 12 or 24 Vdc,
permanent magnet motor with ball bearings and robust ceramic seal,
discharges up to 6ft (1.8m) above the base of the toilet.
Either Solenoid Valve
SEAFLO solenoid valve and syphon breaker assembly for connection
to any existing pressurised water system capable of delivering
2.9gpm (11 lpm) or more. The syphon breaker ensures that there is
no backflow from the toilet into the water system.
Rinse pump
Self-priming up to 1.8m (6ft), dry running, diaphragm water pump
driven by 12 or 24 V dc, permanent magnet, ball bearing motor.
Control Panel
Three-way control panel allows the operator to select a normal flush
and drain cycle, or to lower or raise the water level.
PORTS
Raw Water Rinse pump inlet & outlet,
and Toilet Rinse inlet cover
PARTS
PORTS
Fresh Water Rinse solenoid valve inlet
choice of ½" (13mm) hose tail or
½" (13mm) male thread.
1½" (38mm) hose tail
Flush pump discharge
CAUTION! Seaflo electrical toilets are designed
specifically for marine use. Consult seaflo for
advice about possible non-marine application.
Bowl, seat and cover
¾" (19mm) hose tails
SPECIFICATIONS
DIMENSIONAL DRAWING
14.09in 357.88mm
18.71in 475.30mm
17.22in 437.39mm
To Next Page
Loading...
