Need help?Do you have a question about the Seagate Barracuda ST3000DM001 and is the answer not in the manual?
Explains the advantages and characteristics of the Serial ATA (SATA) interface.
Provides summary tables of drive specifications for various models.
Details drive capacities and how sectors are addressed in LBA mode.
Specifies the default cylinder, head, and sector counts for the drives.
Details recording methods, densities, and data transfer rates for different models.
Lists physical dimensions and weight for the drives.
Describes track-to-track and average seek times for drive operations.
Specifies the time taken for the drive to become ready or stop.
Covers power requirements, modes, consumption, and noise.
Details operating conditions like temperature, humidity, altitude, shock, and vibration.
Lists acoustic sound power levels for idle and seek modes.
Covers RF immunity, warranty, safety, EMC, and FCC compliance.
Details RoHS compliance and precautions for corrosive environments.
Provides essential precautions for handling the drive to prevent ESD damage.
Details SATA interface cable specifications and connector types.
Instructions and precautions for mounting the drive in various orientations.
Confirms support for hot-plugging drives as per SATA Revision 3.0.
Summarizes signals on SATA interface and power connectors.
Lists supported ATA commands, including Identify Device, Set Features, and SMART.
General| Capacity | 3 TB |
|---|---|
| Form Factor | 3.5 inch |
| Interface | SATA 6 Gb/s |
| Cache | 64 MB |
| RPM | 7200 RPM |
| Average Latency | 4.16 ms |
To Next Page