Need help?Do you have a question about the Seagate Momentus Laptop and is the answer not in the manual?
Details the hardware and software needed to utilize the drives.
Presents a quick reference table of key drive specifications for various models.
Details the formatted capacity and sector information for each drive model.
Details the typical seek times for read operations, including track-to-track and average.
Provides typical times for the drive to become ready from power-on or standby states.
Details the power requirements for various drive operations like spinup, seek, read, write, and idle.
Explains the different power management modes available for the drive, such as Active, Idle, Standby, and Sleep.
Details the ATA security commands used for cryptographically erasing the drive for disposal or repurposing.
Details exceptions in ATA Security mode for Momentus 7200 FDE.1 SATA drive behavior during secure erase.
Explains how to identify if DriveTrust support is enabled on the drive.
Details how to identify the drive's Full Disc Encryption capability.
Lists the ATA-standard commands supported by the drive across different security API states.
Describes the Identify Device command and the information it transfers about the drive.
Explains how the Set Features command controls various drive features and their default values.
Details S.M.A.R.T. commands for near-term failure prediction and drive monitoring.
To Next Page
General