Need help?Do you have a question about the Seagate SkyHawk AI and is the answer not in the manual?
Summary tables providing key drive performance and environmental specifications.
Detailed power consumption requirements for various operating states.
Specifies operating and non-operating temperature, humidity, and altitude limits.
Information on Annualized Failure Rate (AFR), MTBF, workload, and warranty.
Essential precautions for handling the drive to prevent ESD damage.
Lists supported ATA commands and their hexadecimal codes.
General| Type | HDD |
|---|---|
| HDD size | 3.5 \ |
| Hot-swap | - |
| HDD speed | - RPM |
| Interface | Serial ATA III |
| HDD capacity | 14000 GB |
| Component for | Surveillance system |
| Start/stop cycles | 300000 |
| Storage drive buffer size | 256 MB |
| HDD interface transfer rate | 6 Gbit/s |
| HDD sustained transfer rate | 250 MiB/s |
| Mean time between failures (MTBF) | 2000000 h |
| Storage drive adapter included | No |
| Operating voltage | 5 / 12 V |
| Power consumption (idle) | 4.9 W |
| Power consumption (standby) | 1.2 W |
| Power consumption (typical) | 6.9 W |
| Non-operating altitude | -304.8 - 12192 m |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 5 - 70 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 5 - 90 % |
Weight and Dimensions| Depth | 146.99 mm |
|---|---|
| Width | 101.85 mm |
| Height | 26.11 mm |
| Weight | 690 g |
To Next Page