Seagate SKYHAWK ST6000VX008 - Page 31

Seagate SkyHawk Product Manual, Rev. H 30
www.seagate.com SATA Interface
70–74 ATA-reserved 0000
H
75 Queue depth 001F
H
76 SATA capabilities xxxx
H
77 Reserved for future SATA definition xxxx
H
78 SATA features supported xxxx
H
79 SATA features enabled xxxx
H
80 Major version number 07F0
H
81 Minor version number 006D
H
82 Command sets supported 306B
H
83 Command sets supported 7561
H
84 Command sets support extension (see note following this table) 6173
H
85 Command sets enabled 30xx
H
86 Command sets enabled B441
H
87 Command sets enable extension 6173
H
88 Ultra DMA support and current mode (see note following this table) xx7F
H
89 Security erase time xxxx
H
90 Enhanced security erase time xxxx
H
92 Master password revision code FFFE
H
93 Hardware reset value xxxx
H
94 Automatic acoustic management D0D0
H
95–99 ATA-reserved 0000
H
100–103
Total number of user-addressable LBA sectors available (see Section 2.2 for
related information). These words are required for drives that support the 48-bit
addressing feature. Maximum value: 0000FFFFFFFFFFFFh.
8TB models = 15,628,053,168
6TB models = 11,721,045,168
4TB models = 7,814,037,168
3TB models = 5,860,533,168
2TB models = 3,907,029,168
1TB models = 1,953,525,168;
104-105 ATA-reserved 0000
H
106 Physical sector size / logical sector size 6003
H
107 ATA-reserved 0000
H
108-111
The mandatory value of the world wide name (WWN) for the drive.
NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN support.
Each drive will have a unique
value.
112-118 ATA-reserved 0000
H
119 Commands and feature sets supported 41DE
H
120 Commands and feature sets supported or enabled 409C
H
121-127 ATA-reserved 0000
H
128 Security status 0021
H
129–159 Seagate-reserved xxxx
H
160–167 ATA-reserved 0000
H
Table 8 Identify Device commands (continued)
Word Description Value