DB35.4 Series SATA Product Manual, Rev. B 21
4.0 Serial ATA (SATA) interface
These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA
programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6.
For detailed information about the Serial ATA interface, refer to the “Serial ATA: High Speed Serialized AT
Attachment” specification.
4.1 Hot-Plug compatibility
DB35.4 Series SATA drives incorporate connectors which enable you to hot plug these drives in accordance
with the Serial ATA Revision 2.5 specification. This specification can be downloaded from www.serialata.org.
To Next Page
Loading...
