Need help?Do you have a question about the Seagate Ultra 160 and is the answer not in the manual?
Provides guidance on how to use the SCSI interface manual effectively.
Describes the SCSI interface protocol and its implementation by Seagate.
Defines key terms and acronyms used throughout the SCSI documentation.
Details the physical aspects of the SCSI interface, including cables and connectors.
Provides an alphabetical summary of SCSI messages with hex codes and page numbers.
Describes the standard signals used on the SCSI bus and their functions.
Defines essential timing measurements for SCSI bus operations.
Explains the different modes for transferring data: Asynchronous, Synchronous, Paced.
Details data formatting and error protection in DT DATA phases.
Covers the process of negotiating transfer agreements between SCSI devices.
Describes the sequence of phases that govern SCSI bus operations.
Explains the process by which an initiator selects a target device.
Details how a target reconnects to an initiator to resume an operation.
Groups phases used for transferring data or control information.
Describes the phase where the target requests command information from the initiator.
Encompasses ST and DT phases for transferring data.
Covers MESSAGE IN and MESSAGE OUT phases for message exchange.
Defines the prescribed order of phases on the SCSI bus.
Details methods for protecting data transfer on the bus.
Outlines general rules and formats for SCSI messages.
Defines the formats for one-byte, two-byte, and extended SCSI messages.
Classifies SCSI messages into categories like Link Control and Task Management.
Negotiates synchronous data transfer, wide data transfer, and protocol options.
Negotiates synchronous data transfer agreements between devices.
Negotiates wide data transfer agreements for improved bandwidth.
Specifies identifiers (tags) for tasks to establish I_T_L_Q nexus.
Defines messages used to manage SCSI tasks, like aborting or resetting.
Describes how an initiator signals a target that a message is ready.
Explains the condition and procedure for performing a bus reset.
Details the process of releasing bus signals and entering BUS FREE phase.
Covers exception conditions and error handling in command processing.
Describes logical operations for transferring SPI information units.
Overview of different types of SPI information units.
Transfers CDBs, task attributes, and task management requests.
Contains nexus information, unit type, and length.
Contains data for transfer.
Contains data for streaming transfers.
Contains task completion status.
Specifies requirements for implementing SCSI commands.
Defines the structure for SCSI command requests.
Describes the status byte returned after command termination.
Covers exception conditions and error handling in command processing.
Explains task queuing mechanisms for handling multiple commands.
Describes issues arising from incorrect initiator connections.
Details the Self-Monitoring Analysis and Reporting Technology system.
Covers default, short, and extended self-test procedures.
Explains foreground and background modes for self-tests.
Describes enhanced error detection for Command, Message, and Status phases.
Details the protection code used for error detection.
Covers physical requirements for adding or removing SCSI devices.
Provides a mapping between SPI-3 and SCSI-2 terminology.
General| Brand | Seagate |
|---|---|
| Model | Ultra 160 |
| Category | Computer Hardware |
| Language | English |
To Next Page
