3. First Installation
The following instructions are for Software Version 2023.9.1 and newer. If you have older
Software, please update as soon as possible by downloading and following instructions here.
https://ride.seakeeper.com/support/software-updates/
If you cannot update your software, please go to Section 5 (Enter Advanced Mode) for step-by-
step instructions on Commissioning older Software.
The Advanced Mode, shown below, will remain available for users that have updated their
Seakeeper Ride system
prior
to September 1, 2023. The following steps shown will show the new
Seakeeper Ride User Interface if the system has been updated
after
September 1, 2023. (Software
2023.9.1 or newer)
The following steps show the order in which Seakeeper Ride performs its set-up for Commissioning
with the update after September 1st, 2023.
These settings all must be entered and completed in preparation for using Seakeeper Ride. The
following information details each system status screen item, what they mean and how they aect
the Seakeeper Ride system.
ATTENTION!Changing these critical settings can render the system
nonfunctional and create an unsafe operating condition. Please
proceed only if you have read and understand this manual in full.
Please read the prompts in each screen and follow the instructions presented on your MFD
within the Seakeeper Ride app.
Welcome
To Next Page
Loading...
