To Next PageTo Next Page
Need help?Do you have a question about the Sealey AK4042 and is the answer not in the manual?
Adhere to safety regulations, wear protection, avoid hazards, ensure ventilation, and handle with care.
Micro design, piezoelectric ignition, anti-ignition cap, 1300°C flame, 30 min operation, adjustable flame control.
Fill in a ventilated area with standard butane fuel, upside down, until gas seeps out. Allow to cool before filling.
Remove cap, release safety lock, press trigger to ignite/extinguish. Use lock lever for continuous flame. Adjust volume control.
Recycle unwanted materials and dispose of product and fluids according to local regulations.
12-month guarantee requires proof of purchase. Policy to improve products; no liability for incorrect use.
Adhere to safety regulations, wear protection, avoid hazards, ensure ventilation, and handle with care.
Micro design, piezoelectric ignition, anti-ignition cap, 1300°C flame, 30 min operation, adjustable flame control.
Fill in a ventilated area with standard butane fuel, upside down, until gas seeps out. Allow to cool before filling.
Remove cap, release safety lock, press trigger to ignite/extinguish. Use lock lever for continuous flame. Adjust volume control.
Recycle unwanted materials and dispose of product and fluids according to local regulations.
12-month guarantee requires proof of purchase. Policy to improve products; no liability for incorrect use.
The Sealey Butane Micro Heating Torch, model AK4042, is a professional-grade micro heating device designed for various applications requiring a concentrated heat source. It operates on butane fuel, commonly known as lighter fuel, offering portability and ease of use.
The primary function of this device is to produce a high-temperature flame, reaching up to 1300°C, for heating purposes. It features a piezoelectric ignition system, which allows for quick and reliable startup without the need for external ignition sources. The torch is designed to provide a continuous burning flame for up to 30 minutes on a single fill, making it suitable for tasks that require sustained heat. An adjustable flame control allows the user to vary the flame strength, providing flexibility for different applications. The device also includes a continuous flame switch, which can lock the flame on, eliminating the need to constantly hold down the trigger during extended use.
Before operation, it is crucial to read and understand the safety instructions provided in the manual. The torch is filled with standard butane fuel in a well-ventilated area, away from open flames. To fill, the torch must be turned off, cooled down for five minutes, and the cap placed on. The torch is then held upside down, and the nozzle of a butane filling can is inserted into the gas filling valve. Gas is released into the torch until it begins to seep out around the nozzle, indicating a full tank.
To use the torch, the cap is removed, and the safety lock is released by turning it anticlockwise. Pressing the trigger ignites the flame. Releasing the trigger extinguishes the flame. For continuous operation, the Lock Lever can be slid to "Lock" after ignition, maintaining the flame without requiring the trigger to be held down. To extinguish the continuous flame, the Lock Lever is slid to "Off." The flame strength can be adjusted using the Gas Volume Control Lever; moving it towards "+" increases the flame, while moving it towards "-" decreases it.
Safety is paramount when operating the torch. Users must always wear approved eye/face protection and ensure adherence to health and safety regulations. The torch should always be pointed away from the eyes and body during ignition and operation. It is critical not to put the torch down when lit or leave it unattended. The flame, especially in bright daylight, may not be easily visible, so caution is advised. After use, it is essential to ensure the flame is completely extinguished before applying the safety lock, placing the cap, and allowing the torch to cool down. Water should never be used to cool the torch.
The torch should only be used in a well-ventilated area. It is strictly prohibited to use the torch in areas with paint fumes, solvents, or other flammable materials that pose a potential hazard. Flammable materials must be kept away from the torch during operation. The device should not be operated if the user is tired or under the influence of alcohol, drugs, or intoxicating medication. Workpieces should never be held by hand when being heated, and the heated area should not be touched until it has cooled down. Children should never be allowed to operate the torch.
Proper maintenance ensures the longevity and safe operation of the torch. After each use, the torch should be allowed to cool completely before storage. It should be stored in a safe, dry, childproof location, away from direct sunlight. The torch should not be stored at temperatures exceeding 40°C, such as inside a car in hot weather. Regular inspection for any damage is recommended; if the torch is damaged, it should not be operated as it may lead to failure or personal injury. The top of the torch becomes very hot during and immediately after use and should not be touched until it has cooled.
The device is designed for durability, but proper handling and adherence to the manufacturer's guidelines are essential. The anti-ignition cap helps prevent accidental operation, contributing to overall safety. While the manual does not detail specific cleaning procedures, general good practice would suggest keeping the device free from dirt and debris to ensure optimal performance. Any issues with gas leaks or damage should prompt immediate cessation of use and appropriate action, as per safety warnings. The product comes with a 12-month warranty from the purchase date, requiring proof of purchase for any claims.
General| Model | AK4042 |
|---|---|
| Brand | Sealey |
| Light Source | LED |
| Battery Type | Rechargeable |
| Battery Quantity | 1 |
