Sealey AP2200BB Series

To Next Page

INSTRUCTIONS FOR:

TOPCHEST & ROLLCAB COMBINATION 6 DRAWER

with BALL BEARING RUNNERS

MODEL Nos:

AP2200BB SERIES

1. SAFETY

2. INTRODUCTION

3. SPECIFICATIONS

4. ASSEMBLY

1.1. GENERAL SAFETY

 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this Topchest &

Rollcab combination.

 Locate the Topchest & Rollcab combination in a suitable working area.

 Keep the work area clean, uncluttered and ensure there is adequate lighting.

 Keep the Topchest & Rollcab combination clean and tidy in accordance with good workshop practice.

 Keep children and unauthorised persons away from the working area.

 DO NOT use the Topchest & Rollcab combination for any purpose other than that for which it is designed.

 DO NOT move the Topchest & Rollcab combination with drawers open.

 DO NOT open more than one drawer at the same time.

 DO NOT step on the drawers.

 DO NOT use in damp work areas.

 WARNING! The warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and situations that may

occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.

The economical way to buy American PRO Ball Bearing quality chests. Supplied packed one inside the other.

This mid-size combo has smooth 25mm ball bearing runners and all the features of the professional chests except that the rollcab is not lockable and

the castors are Ø75mm. These boxes are not interchangeable with the rest of the American PRO Ball Bearing range.

g.1

g.2

4.1. Remove the bolts, nuts and washers from the base of the rollcab (g.1), and then lift off the body to uncover the topchest.

4.2. Remove the screws from the base (g.2), and separate from the topchest, discard the screws.

Note: Place protective material onto the ground to avoid damaging the back of the topchest.

Model No: AP2200BB......

4 Drawer Topchest

Overall Size: 600 x 260 x 340mm

Small Drawer (3): 510 x 225 x 35mm

Medium Drawer (1): 510 x 225 x 85mm

2 Drawer Rollcab

Overall Size: 616 x 295 x 703mm

Medium Drawer (2): 515 x 275 x 65mm

AP2200BB SERIES

Issue: 1 - 07/03/16

Original Language Version

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT

CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL

INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions and maintained properly, give you years of trouble free performance.

Refer to

Instruction

Manual

Need help?

Do you have a question about the Sealey AP2200BB Series and is the answer not in the manual?

Summary

Safety

General Safety

Adherence to health, safety, local authority, and workshop practice regulations for Topchest & Rollcab combination.

Summary

Safety

General Safety

Adherence to health, safety, local authority, and workshop practice regulations for Topchest & Rollcab combination.

The AP2200BB Series Topchest & Rollcab Combination is a 6-drawer storage unit designed for workshop use, featuring ball-bearing runners for smooth operation. This product is an economical option within the American PRO Ball Bearing quality chests range, supplied packed one inside the other. It is important to note that these boxes are not interchangeable with other products in the American PRO Ball Bearing range.

Function Description:

The primary function of this combination unit is to provide organized and secure storage for tools and other workshop items. It consists of two main components: a 4-drawer topchest and a 2-drawer rollcab. The topchest sits on top of the rollcab, creating a comprehensive storage solution. Drawers are equipped with smooth 25mm ball-bearing runners, ensuring easy opening and closing. The topchest includes a locking mechanism for enhanced security, where a lock bar is inserted into a back slot inside the top compartment, and the lid is then locked with a key. The rollcab, however, is not lockable. The unit is designed for stationary use in a workshop environment, and it is explicitly stated that it should not be moved with drawers open.

Important Technical Specifications:

The AP2200BB Series is a mid-size combo.

4-Drawer Topchest:
- Overall Size: 600 x 260 x 340mm
- Small Drawer (3): 510 x 225 x 35mm
- Medium Drawer (1): 510 x 225 x 85mm
2-Drawer Rollcab:
- Overall Size: 616 x 295 x 703mm
- Medium Drawer (2): 515 x 275 x 65mm
Runners: Smooth 25mm ball-bearing runners for all drawers.
Castors: Ø75mm (for the rollcab).

Usage Features:

Assembly: The unit requires assembly upon receipt. This involves removing the rollcab body from its base, uncovering the topchest, and then attaching the rollcab base components (corner brackets and back panel) using bolts, washers, and nuts. The rollcab is then turned upright, and the topchest is placed on top. Protective material should be used during assembly to prevent damage.
Security: The topchest offers a locking feature. To lock, all drawers must be closed, a lock bar inserted into the back slot inside the top compartment, and the lid then locked with a key. The rollcab does not have a locking mechanism.
Drawer Operation: The ball-bearing runners ensure smooth and easy operation of the drawers. Users are cautioned against opening more than one drawer at a time and against stepping on the drawers.
Placement: The unit should be located in a suitable, clean, uncluttered, and well-lit working area.
Safety Precautions:
- Adhere to Health & Safety, local authority, and general workshop practice regulations.
- Keep children and unauthorized persons away from the working area.
- DO NOT use the combination for any purpose other than its intended design.
- DO NOT move the combination with drawers open.
- DO NOT open more than one drawer at the same time.
- DO NOT step on the drawers.
- DO NOT use in damp work areas.
- Common sense and caution are essential for safe operation.

Maintenance Features:

Drawer Slides Lubrication: The drawer slides should be periodically lubricated to maintain smooth operation.
Cleaning: The surfaces of the unit should be cleaned with a soft cloth and a mild water/detergent solution.
Fixings Check: All fixings should be checked periodically and tightened if required to ensure the structural integrity of the unit.

This combination unit is designed for durability and ease of use in a workshop setting, offering a practical storage solution with a focus on organized and secure tool management.