STEP 5 BOTTOM CABINET: Turn the cabinet over.
Attach the bottom panel using 11x M6x16mm screws.
STEP 6 BOTTOM CABINET: Fit adjustable feet.
STEP 7: Place top cabinet onto bottom cabinet.
STEP 9: Insert 4x shelf supports inside the cabinet at the desired height. Place shelf on shelf supports. NOTE: the cabinet will only lock when
the shelf is placed in the centre position.
STEP 8: Connect top and bottom cabinets
using M6x35mm hex ange bolts.
Repeat for the other stackable combination.
M6X35 ange bolt
X4
Original Language Version
© Jack Sealey Limited
APMSHFP series | Issue 1 21/10/19
bottom
cabinet
bottom
cabinet
bottom
cabinet
top
cabinet
M6x16mm
screws
shelf
shelf support
To Next Page
Loading...