Sealey CB1000.V3 - User Manual

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and maintained properly, give you years of trouble free performance.
Refer to instruction
manual
CB500.V3,1000.V3,2000.V3,3000.V3, 5000.V3 Issue: 2 - 09/10/17
Original Language Version
© Jack Sealey Limited
INSTRUCTIONS FOR:
CHAIN BLOCKS
MODEL No's: CB500.V3, CB1000.V3,CB2000.V3,
CB3000.V3, CB5000.V3.
1. CONTENTS
Section 2. General. ....................................1.
Section 2.1. Identification .................................1.
Section 2.2. Technical Data. ...............................1.
Section 3. Safety/Operational Instructions. ..................2.
Section 4. Maintenance/Examination/Inspection. .............2.
Section 5. Assembly and storage. .........................3.
Section 6. Owner’s & Operator’s Responsibilities .............3.
Section 7. Declaration of Conformity. ......................4.
Section 8. Parts List/Diagram ............................5.
Page No.
Page No.
2.1. Identification
Supplier: Sealey Power Products,
Kempson Way,
Suffolk Business Park,
Bury St Edmunds,
Suffolk, IP32 7AR.
Model No's:CB500.V3, CB1000.V3,
CB2000.V3, CB3000.V3,
CB5000.V3.
2.2. Technical Data (A,B and C refer to fig.1)
Model No: .................CB500.V3 ....... CB1000.V3 ... CB2000.V3 .....CB3000.V3 .... CB5000.V3
Safe Working Load: ..........500kg........... 1000kg ...... 2000kg ........3000kg............5000kg
Test Load:..................750kg........... 1500kg ...... 3000kg ........4500kg ............7500kg
Standard Lift (C): ............2.5mtr .......... 2.5mtr ....... 3mtr...........3mtr . . . . . . . . . . . . . . . . 3mtr
Load Chain Diameter: ........6mm ........... 6mm ........ 8mm ..........8mm...............10mm
Pulling Effort: ...............23.5kgf.......... 31.5kgf ...... 36.7kgf ........34.67kgf..........42.22kgf
Head Room: ................295mm ......... 317mm ...... 470mm ........530mm ...........588mm
Overall Width (B):............127mm ......... 140mm ...... 187mm ........199mm ...........186mm
Overall Depth (A):............131mm ......... 158mm ...... 161mm ........161mm ...........253mm
Hook Aperture: ..............25mm .......... 23mm ....... 33mm .........35mm .............50mm
Maximum Hook Capacity Ø: ...35mm .......... 40mm ....... 45mm .........50mm .............65mm
Weight: ....................10kg............ 12kg ........ 19kg ..........25kg................43kg
a) Design Capability: Test Load 50% overload.
b) For applications see Section 3.
c) For information on parts and materials requiring specialised repair techniques see Section 4.
d) Ambient operating temperature is between -10°C and +50°C.
PAGE 1

Sealey CB1000.V3 Specifications