Sealey LEDFLEXG - User Manual

FLEXI RECHARGEABLE GREEN INSPECTION
LAMP LI-ION 1 COB + 1 LED
MODEL NO: LEDFLEXG
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETYi
1.1. GENERAL
9 Ensure the lamp is fully charged before initial use.
8 DO NOT turn the lamp on when it is being charged.
8 DO NOT shine directly into your, another person’s or an animal’s eyes.
8 DO NOT allow children to use the lamp.
8 DO NOT use the lamp if you suspect that the battery or the lamp casing is damaged.
8 DO NOT leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently
recharge the battery at least once every six months of non-use.
1.2. The Health & Safety at Work Act 1974 makes owners of electrical appliances responsible for the safe condition of the appliance and
 thesafetyoftheapplianceoperator.Ifinanydoubtaboutelectricalsafety,contactaqualiedelectrician.
1.3. BATTERY SAFETY
 WARNING!Toreducetheriskofburnsorre:
8 DO NOT attempt to open, disassemble, modify or service the battery pack.
8 DO NOTcrush,puncture,shortexternalcontactsordisposeofinreorwater.
8 DO NOT expose to temperatures above 60°C (140°).
9 If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with cool
water and seek immediate medical attention
2. INTRODUCTION
Unique new 360° design made from high impact materials. High power COB LED produces up to 500 lumens in tight spaces like engine
 compartments.Featuresa160mmstrongheavy-dutyexibleneckwiththeabilitytoholditspositionwhereeveryouneedit.Toplightis
a 3W LED producing up to 120 lumens. Features a sturdy base which means can also be used a desk lamp. Base includes a strong
magnet and 90° folding hook. One switch controls top light, side light and dimmer function. Features LED battery charge level indicator
and charged by a micro USB. Supplied with micro USB lead.
3. SPECIFICATION
Model no: ........................................................... LEDFLEXG
Battery: ......................................................3.7V 2.6 Ah Li-ion
LED Qty: ....................................................... 1 COB + 1 LED
Lumen output: ............................ Side 50 - 500lm / Top 120lm
Operating time: ................................... Side:2-16hr, Top 9.5hr
Overall length: ............................................................ 425mm
Weight: ........................................................................ 290gm
IP Rating: ........................................................................IP54
LEDFLEXG Issue 1 21/01/19
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual

Summary

Safety Instructions

General Safety

General safety guidelines covering charging, usage, and maintenance of the lamp.

Battery Safety Precautions

Warnings on battery handling: avoid opening, puncturing, or disposing in fire/water.

Product Operation

Charging Procedure

Instructions for charging the unit, including the function of charge level LEDs.

Lighting Mode Selection

How to select and control different lighting modes: LED, COB, and dimmer function.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Sealey LEDFLEXG is a Flexi Rechargeable Green Inspection Lamp, featuring a Li-ion battery, one COB (Chip-on-Board) LED, and one additional LED. This product is designed for various inspection tasks, offering versatile lighting options and a robust build.

Function Description

The LEDFLEXG lamp serves as a portable and flexible lighting solution, ideal for illuminating tight spaces such as engine compartments or as a desk lamp. It incorporates a high-power COB LED for broad illumination and a 3W LED for focused top lighting. The lamp's flexible neck allows for precise positioning, while its magnetic base and folding hook provide multiple mounting options.

Important Technical Specifications

• Model No.: LEDFLEXG
• Battery: 3.7V 2.6 Ah Li-ion
• LED Quantity: 1 COB + 1 LED
• Lumen Output:
  • Side (COB): 50 - 500lm (dimmable)
  • Top (LED): 120lm
• Operating Time:
  • Side (COB): 2 - 16 hours (variable with dimming)
  • Top (LED): 9.5 hours
• Overall Length: 425mm
• Weight: 290gm
• IP Rating: IP54 (Dust protected and splash-proof)
• Charging: Micro USB
• Construction: High impact materials, 160mm strong heavy-duty flexible neck.

Usage Features

The LEDFLEXG offers user-friendly operation with multiple lighting modes and a flexible design:

• Flexible Neck: A 160mm heavy-duty flexible neck allows the user to position the light precisely where needed, making it highly adaptable for various angles and confined spaces.
• Mounting Options: The sturdy base includes a strong magnet for attachment to metallic surfaces and a 90° folding hook for hanging, providing hands-free operation. It can also be used as a desk lamp due to its stable base.
• Lighting Modes: The lamp features four distinct lighting modes controlled by a single Mode Selector switch:
  1. LED Mode: Activates the 3W top LED, producing 120 lumens.
  2. COB Mode: Activates the side COB LED, offering a range of 50-500 lumens.
  3. COB Dimmer Function: Allows the user to rotate the Mode Selector switch to adjust the brightness of the COB LED to the desired level.
  4. Off: Turns the unit off.
• Mode Selection: To select LED mode, press and hold the Mode Selector switch. To change to COB mode, press and hold the switch once more. To dim COB mode, rotate the switch. To turn the unit off, press and hold the switch again.
• Battery Charge Indicator: Features LED battery charge level indicators to show the remaining power and charging status.
• Charging: The lamp is charged via a micro USB cable, which connects to a socket on the rear of the handle. During charging, the indicator LEDs will flash, and once fully charged, all LEDs will remain permanently lit.

Maintenance Features

Proper maintenance ensures the longevity and optimal performance of the LEDFLEXG:

• Battery Care:
  • Ensure the lamp is fully charged before initial use.
  • Do not turn the lamp on while it is being charged.
  • Do not leave the battery in a discharged state; recharge it immediately after use.
  • Before storage, fully recharge the battery. For prolonged storage, recharge the battery at least once every six months to prevent deep discharge.
  • Do not expose the battery to temperatures above 60°C (140°F).
  • Do not attempt to open, disassemble, modify, or service the battery pack.
  • Do not crush, puncture, short external contacts, or dispose of the battery in fire or water.
• General Care:
  • Do not use the lamp if you suspect that the battery or the lamp casing is damaged.
  • Keep the lamp clean and free from debris.
  • If electrolyte from the cells comes into contact with skin, wash thoroughly with soap and water. If it gets into eyes, rinse thoroughly with cool water and seek immediate medical attention.
• Safety Precautions:
  • Do not shine the light directly into your, another person's, or an animal's eyes.
  • Do not allow children to use the lamp.
  • Always use the product correctly and with care for its intended purpose. Failure to do so may cause damage, personal injury, and invalidate the warranty.
• Disposal: At the end of its working life, dispose of the product in compliance with EU Directive on Waste Electrical and Electronic Equipment (WEEE). Contact your local solid waste authority for recycling information. Recycle unwanted materials responsibly.

The Sealey LEDFLEXG is a versatile and durable inspection lamp designed for reliability and ease of use in various professional and domestic settings.

Sealey LEDFLEXG Specifications