Sealey PHA100 - User Manual

To Next Page

2-STROKE PETROL EARTH AUGER

MODEL NO: PHA100

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

1.1. GENERAL SAFETY

 WARNING! THIS MACHINE MAY CAUSE SERIOUS INJURIES. Read the instructions carefully for handling, preparing,

maintaining, starting, stopping and operating the machine. Learn about all the controls and proper use of the machine.

 WARNING! When using this type of tool, basic precautions should always be followed to reduce the risk of re, electric shock and

injury.

9 Read all instructions carefully before attempting to use this product and retain these instructions. Be familiar with all the operations

described in these operating instructions.

9 This product must be operated only by experienced users.

9 If you are giving this machine to others, please also provide them with this instructions manual.

9 Use this machine as described in this instruction manual. It is strictly forbidden to use this tool for applications other than those

described in this manual.

9 Failure to follow these instructions can result serious injuries or death.

9 Never let people unfamiliar with these instructions or children use this product.

9 Keep in mind that the operator or user is responsible for accidents or risks to other persons or their property.

8 DO NOT use the tool if you have consumed alcohol, are tired, under the inuence of drugs or ill. DO NOT use the tool if you are not

in an adequate physical condition.

9 This tool is intended for outdoor use. Never use it indoors.

9 Never allow children use the machine.

9 Dress properly! DO NOT wear loose tting clothing or jewellery that can be caught in moving parts. Use of resistant gloves, non-slip

shoes and safety glasses is recommended; stop the engine or disconnect it before:

cleaning or clearing a blockage;

checking, maintaining, or working on the machine;

when adjusting the working position of the cutting device.

9 Never add fuel to a machine with a running engine or when it’s hot. DO NOT inhale fuel fumes as they are toxic.

9 Always inspect the machine before and after operation.

8 DO NOT attempt to repair the machine unless you are qualied to do so. Repairs should be carried out only by an authorized service

centre or a similar qualied specialist.

8 DO NOT use the machine with a damaged or excessively worn cutting device.

9 To reduce the risk of re, keep the engine and exhaust free from debris, leaves or excessive lubricant.

9 Always make sure that all handles and guards are installed when operating the machine.

9 Never attempt to use an incomplete machine or a machine equipped with an unauthorized modication.

9 When transporting or storing the machine, always original packaging for device protection.

9 Always be aware of your environment and pay attention to possible dangers that cannot be heard due to the noise of the machine.

9 Keep people and animals away from the work area. Children and people who do not know how to use this tool should not touch it

and handle it.

9 Use the product only under daylight or under good articial light.

9 When using the machine, always wear full protective equipment including a helmet, protective mask, ear protection, gloves, non-slip

footwear and protective clothing.

9 Wear appropriate clothing. DO NOT wear loose or unbuttoned shirts. DO NOT wear jewellery that may come in contact with moving

parts. If you have long hair, tie them down and wear an appropriate safety helmet.

8 DO NOT operate the product with damaged guards or shields not in place.

9 Keep hands and feet away from the unit at all times, especially when turning the tool o󰀨 and on.

8 DO NOT use the tool in an area where ventilation is poor. Gas emissions can cause injury.

8 DO NOT use the tool when it’s raining or during bad weather. DO NOT use the tool in damp locations.

8 DO NOT use the tool in the presence of ammable liquids or gases.

 WARNING! The machine releases gases when it is used. Avoid coming into contact with these gases.

9 Keep the work area clear. Before working, inspect the work area and remove any materials or objects that could cause accidents.

9 Survey the area to be worked prior to starting to avoid hitting underground services i.e. electricity cables, phone lines etc.

9 Keep the tool and drill clean for better and safer performance. Follow the instructions in this manual to lubricate and change the

accessories.

9 Turn o󰀨 the tool after use, when you leave it unattended, when changing the accessories and before servicing.

PHA100 Issue 2 (3,4) 17/09/21

Original Language Version

Refer to

instructions

Hot surfaces

Wear eye

protection

Wear protective

gloves

Wear ear

protection

Wear safety

footwear

Wear protective

clothing

Warning:

Flammable liquid

Need help?

Do you have a question about the Sealey PHA100 and is the answer not in the manual?

This document describes the SEALEY PHA100 2-Stroke Petrol Earth Auger, a robust tool designed for digging holes in the ground.

Function Description

The PHA100 earth auger is a petrol-powered device primarily used for digging holes. It is suitable for various applications such as planting trees, installing fence posts, and other tasks requiring ground penetration. The auger operates using a 2-stroke engine, which requires a specific mixture of unleaded petrol and 2-stroke engine oil for fuel. It features a safety switch to prevent accidental starting and a choke lever for easier cold starts. The device is designed for two-person operation, especially when handling the auger during use, to ensure stability and control.

Important Technical Specifications

Model No.: PHA100
Engine Capacity: 52cc
Engine Type: Single Cylinder Air Cooled 2-Stroke
Fuel Consumption: 0.85L/h
Fuel Tank: 2-Stroke 25:1 (1.2L)
Max Engine Speed: 8500rpm
Maximum Power: 2hp 7500rpm
Maximum Torque: 1.8Nm
Noise Rating: 116dB(A) Guaranteed Value
Vibration/Uncertainty: 20.52m/s² 1.5m/s²

The auger is compatible with different diameter bore sizes: 100, 150, or 200mm. It is supplied with a 2-stroke 25:1 fuel mixing bottle for convenience.

Usage Features

Fuel Handling: The PHA100 requires a specific fuel mixture of unleaded petrol and 2-stroke engine oil at a 25:1 ratio. It is crucial to use only unleaded petrol that does not contain ethanol or methanol. The fuel tank capacity is 1.2 liters. Users must prepare the mixture in a clean and empty container, pouring the oil first, then the petrol, and shaking gently for one minute to ensure proper blending. The fuel tank should not be overfilled, with a maximum capacity of 80% to allow for expansion. Always check the fuel level before starting and refuel in a well-ventilated area, away from ignition sources.

Starting the Operation: To start the auger, first ensure the safety switch is in the ON position. For cold starts, move the choke lever to the ON position and press the primer bulb 5-7 times until fuel becomes visible. Pull the starter cord until the engine starts. Once the engine starts, move the choke lever to the OFF position. For warm starts, the choke lever can remain in the OFF position. After starting, allow the engine to warm up for a few minutes before using.

Operating the Auger: The auger is designed for two-person operation to ensure stability and control. Users should wear appropriate personal protective equipment (PPE) including head protection, ear protection, eye protection, heavy-duty gloves, and sturdy footwear. Loose clothing, jewelry, or long hair should be secured to prevent entanglement. The work area should be clear of obstacles, children, and animals. When digging, maintain a firm grip on the handles and avoid working on slopes or in areas with poor footing. If the auger hits an obstruction, release the throttle immediately. The machine should be stopped and inspected for damage if it experiences unusual vibration or noise.

Safety Precautions: The manual emphasizes numerous safety warnings. Users must read and understand the entire manual before operating the device. It highlights the importance of wearing appropriate PPE, maintaining a clear work area, and ensuring the machine is in good working order. Never operate the auger under the influence of drugs or alcohol. Always keep hands and feet away from the auger bit. The machine should not be left unattended while running. In case of an emergency, release the throttle and engage the safety switch.

Maintenance Features

Routine Maintenance: Regular maintenance is crucial for the longevity and safe operation of the PHA100.

Service: The manual recommends servicing the tool regularly and using authorized service centers for repairs.
After Each Use: Clean the rod and tool body for cleanliness, wear, damage, etc. If damage is noticed, use an authorized service center for inspection and repair.
Air Filter: Check the air filter after each use. Remove the filter cover, remove the filter element, and clean it using warm water and detergent. Dry thoroughly before replacing. Change the air filter after each season (or after 50 hours of use).
Spark Plug: Check, clean, and readjust the spark plug every 6 months. In case of replacement, contact the after-sales service.
Gear Oil Injection Port: Add new special oil (gear oil, SAE 85W / 90, 150 ml maximum). Replace the valve.
Storage: Clean the machine thoroughly before storage. Store the machine in a dry and safe place, out of reach of children. When storing for long periods of time, empty the fuel tank completely.

Troubleshooting: The manual includes a section for troubleshooting common issues, such as the machine not starting or running poorly. It advises checking the fuel mixture, spark plug, and air filter. If problems persist, users are instructed to contact an authorized service center.

Environmental Protection: The PHA100 is designed with environmental protection in mind. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations. The product complies with the WEEE Directive on Waste Electrical and Electronic Equipment.

Sealey PHA100 Specifications

General

Brand	Sealey
Model	PHA100
Category	Lawn and Garden Equipment
Language	English