Need help?Do you have a question about the Sealey SM27.V2 and is the answer not in the manual?
Covers electrical safety precautions, RCDs, and wiring for safe operation.
Guides through the initial setup and running of the lathe before use.
Describes the headstock and its features, including taper size.
Describes the tailstock, its taper, and how to position it.
Explains the tool post, its mounting on the compound slide, and rotation.
Details how to fit and remove chuck jaws, including jaw sequencing.
Explains how to adjust the spindle speed by changing belt arrangements.
Describes the basic turning process, tool height, and workpiece mounting.
Explains how to use the automatic feed for turning operations.
Details the process for screw cutting, including gear selection.
Details lubrication and checks required before operating the lathe.
Instructions for cleaning the machine after each use and oiling surfaces.
Explains how to reduce play in the machine slides using gib strip screws.
Describes how to check and adjust the headstock oil level via sight glass.
Covers electrical safety precautions, RCDs, and wiring for safe operation.
Guides through the initial setup and running of the lathe before use.
Describes the headstock and its features, including taper size.
Describes the tailstock, its taper, and how to position it.
Explains the tool post, its mounting on the compound slide, and rotation.
Details how to fit and remove chuck jaws, including jaw sequencing.
Explains how to adjust the spindle speed by changing belt arrangements.
Describes the basic turning process, tool height, and workpiece mounting.
Explains how to use the automatic feed for turning operations.
Details the process for screw cutting, including gear selection.
Details lubrication and checks required before operating the lathe.
Instructions for cleaning the machine after each use and oiling surfaces.
Explains how to reduce play in the machine slides using gib strip screws.
Describes how to check and adjust the headstock oil level via sight glass.
To Next Page
General