Need help?Do you have a question about the Sealey SM3002.V2 and is the answer not in the manual?
Ensures safe operation by detailing electrical compliance, wiring, and hazard avoidance.
Covers essential safety practices for lathe operation, workpiece security, and personal protection.
Guides unpacking, cleaning, positioning, and attaching handles and controls for initial setup.
Procedure for initial power-up, speed checks, and running the lathe safely.
Details headstock spindle, tailstock spindle, and their respective Morse tapers.
Covers adjustment of the tool rest and installation/use of the chuck.
Instructions for basic turning and engaging the automatic feed for cutting.
Guides on setting up the gear train and performing screw cutting operations.
Routine lubrication of leadscrew and cross slide, and general machine cleaning.
Inspection of motor brushes and procedures for adjusting slide play.
Ensures safe operation by detailing electrical compliance, wiring, and hazard avoidance.
Covers essential safety practices for lathe operation, workpiece security, and personal protection.
Guides unpacking, cleaning, positioning, and attaching handles and controls for initial setup.
Procedure for initial power-up, speed checks, and running the lathe safely.
Details headstock spindle, tailstock spindle, and their respective Morse tapers.
Covers adjustment of the tool rest and installation/use of the chuck.
Instructions for basic turning and engaging the automatic feed for cutting.
Guides on setting up the gear train and performing screw cutting operations.
Routine lubrication of leadscrew and cross slide, and general machine cleaning.
Inspection of motor brushes and procedures for adjusting slide play.
General| Model | SM3002.V2 |
|---|---|
| Type | Lathe |
| Swing Over Bed | 180mm |
| Distance Between Centres | 300mm |
| Spindle Speed | 100-2500rpm |
| Motor Power | 550W |
| Weight | 40kg |
| Spindle Bore | 20mm |
| Supply | 230V |
| Voltage | 230V |
To Next Page