Sealey TP67 - Assembly Instructions; Preparation and Adaptor Assembly

5. ASSEMBLY
5.1. PREPARATIONS FOR ASSEMBLY
5.1.1.  Removeparts3,5,6,7,8fromthemainpumpassembly(g1),andstoreinasafeplaceforfutureuse.
5.1.2. Identify parts 1,2 & 4, and keep for to use for Adaptor assembly.
5.2. ADAPTOR ASSEMBLY
5.2.1.  Assembleasshown(g2)incorporatingparts1,2fromthemainpumpassembly.
5.2.2.  Takepart4(locknut),invertit,andtittotheendofthepump.
5.3.
.
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts
without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty:Guaranteeis12monthsfrompurchasedate,proofofwhichisrequiredforanyclaim.
REGISTER YOUR
PURCHASE HERE
TP67, TP67/X Issue:2 27/11/23