Figure 4.16
5) If the vehicle supports readiness test of “This Drive Cycle”, a
screen of the following displays:
Figure 4.17
6) The LEDs and audio tone corresponding to different monitor
status will be activated as below.
7) Use the SCROLL button for more PIDs if additional information
is available on more than one page.
8) Press the ENTER/Exit button to return to Diagnostic Menu.
…………Since DTCs Cleared 1
MIL Status OFF
Misfire Monitor OK
Fuel System Mon OK
Comp. Component OK
Catalyst Mon INC
Htd Catalyst N/A
…………..This Drive Cycle 1.
MIL Status OFF
Misfire Monitor OK
Fuel System Mon N/A
Comp. Component OK
Catalyst Mon INC
Htd Catalyst N/A
To Next Page
Loading...