1
Refer to instructions
To prevent personal injury or damage to vehicles and/or the
diagnostic tool, read this instruction manual first and observe the
following safety precautions at a minimum whenever working on a
vehicle:
Always perform automotive testing in a safe environment.
Wear safety eye protection that meets ANSI standards.
Keep clothing, hair, hands, tools, test equipment, etc. away from all
moving or hot engine parts.
Operate the vehicle in a well-ventilated work area: Exhaust gases
are poisonous.
Put blocks in front of the drive wheels and never leave the vehicle
unattended while running tests.
Use extreme caution when working around the ignition coils,
ignition wires and spark plugs. These components create
hazardous voltages when the engine is running.
Put the transmission in PARK (for automatic transmission) or
NEUTRAL (for manual transmission) and ensure that the
handbrake is applied.
To Next Page
Need help?
General
